We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic inline fuse holder with two crimped 16 AWG wire leads and ATM mini fuse slot

Bussmann

Bussmann ATM Mini Add-A-Circuit Fuse Holder 10 A 12 V 16 AWG

SKU CH-98AP-0JPXK

Adds a protected circuit to an ATM fuse slot using a 10 A holder with 16 AWG leads for 12 V systems

  • Adds a protected circuit without splicing the loom
  • Rated for 10 A at 12 V DC in automotive use
  • Accepts standard ATM mini blade fuses up to 10 A
  • Pre-crimped 16 AWG leads speed up installation
  • Compact 1.6 in body fits tight fuse-box spaces

Purpose and audience

The Bussmann ATM Mini Add-A-Circuit fuse holder adds a protected circuit to an existing automotive fuse block without cutting factory wiring. It accepts ATM-style fuses up to 10 A at 12 V DC and includes 16 AWG wire leads with crimp connectors ready for a new accessory feed.

Who it suits and who it does not

Installers adding a dash camera, auxiliary lighting or similar low-current accessory will find the inline holder a quick, non-invasive solution. Builders who need a second independent fuse block, higher amperage capacity or a weather-sealed enclosure should look at a different product.

Installation and common pitfalls

The 5 in wire leads with crimp terminals allow a straightforward splice into the new circuit, and the holder simply plugs into a spare ATM slot in the fuse panel. A loose crimp or an undersized fuse can cause voltage drop or nuisance blowing, so verify the connection quality and match the fuse rating to the accessory load.

Highlights

  • Adds a protected circuit without splicing the loom
  • Rated for 10 A at 12 V DC in automotive use
  • Accepts standard ATM mini blade fuses up to 10 A
  • Pre-crimped 16 AWG leads speed up installation
  • Compact 1.6 in body fits tight fuse-box spaces

Specifications

BrandBUSSMANN

Questions about this item

What fuse box slot does the ATM mini add-a-circuit need to plug into?

It fits a standard ATM mini fuse slot in your vehicle's fuse panel.

Can I use the 16 AWG wire leads with my car's existing 12 V circuits?

Yes, the holder is rated for 12 V DC and the 16 AWG leads handle up to 10 A.

How do I confirm the add-a-circuit is making proper contact after installation?

Check that the fuse seats fully and the crimp connectors on the 5 in leads are secure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.