Bussmann
Bussmann AGC-1-R Glass Fuse 1A 250V AC Fast-Acting 5 Pack
Five fast-acting glass fuses rated 1 A at 250 V AC with a 35 A interrupt rating at that voltage
- Fast-acting protection clears faults quickly
- 10 kA interrupt rating at 125 V AC handles high fault currents
- 35 A interrupt rating at 250 V AC suits mains-voltage circuits
- Standard 1-1/4 in × 1/4 in glass body fits common fuse blocks
- Five-piece pack provides ready spares for maintenance
Bussmann AGC-1-R Glass Fuse Pack
This pack contains five fast-acting glass fuses rated at 1 ampere and 250 volts AC. They are designed for low-current circuit protection in automotive, marine and general electrical applications. The cylindrical 1-1/4 inch by 1/4 inch form factor fits standard AGC fuse holders.
Glass Body and Compatible Fuse Blocks
The glass tube construction allows visual inspection of the filament after a fault. These non-rejection fuses install in compatible block series such as 3823, HFA, HHN, HK, HKP, HPF, HRK, HTB and S-8000. They serve as direct equivalents for Bussmann AGC, MMB and Littelfuse 311, 312, 3AG series.
Verify Amperage and Interrupt Rating
Confirm that the protected circuit requires exactly 1 ampere of current before fitting these fuses. Check that the available fault current does not exceed 10 kiloamperes at 125 volts AC or 35 amperes at 250 volts AC. Ensure the fuse block accepts the standard 1-1/4 inch length and 1/4 inch diameter.
Highlights
- Fast-acting protection clears faults quickly
- 10 kA interrupt rating at 125 V AC handles high fault currents
- 35 A interrupt rating at 250 V AC suits mains-voltage circuits
- Standard 1-1/4 in × 1/4 in glass body fits common fuse blocks
- Five-piece pack provides ready spares for maintenance
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
What voltage and interrupt rating does the AGC-1-R glass fuse carry?
The fuse is rated for 250 V AC with an interrupt rating of 35 A at that voltage, and 10 kA at 125 V AC.
What are the physical dimensions of the AGC-1-R fuse for fuse-block fit?
It measures 1-1/4 inches long by 1/4 inch in diameter, matching the standard AGC/3AG cylindrical body.
How is the AGC-1-R fuse installed, and what common error should be avoided?
Press the glass tube into a compatible 3823, HFA, HK or HPF series fuse block until the metal caps seat fully; do not force a rejection-type holder that requires a notched cap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
