We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Burris 410341 AR PEPR 30mm scope mount with Picatinny tops

Burris

Burris 410341 AR PEPR Mount 30mm with Picatinny Tops

SKU CH-RTTG-P99ZY

Provides 2" forward scope positioning on AR and M4 platforms with integrated Picatinny tops for accessories

  • Proper eye position with 2" forward scope placement on AR/M4 platforms
  • Single-piece milled ring bases deliver a tough, unified mounting platform
  • Picatinny tops on ring caps allow direct accessory attachment
  • Designed specifically for 30mm combat riflescopes
  • Burris 410341 model built for AR PEPR applications

AR PEPR Mount 30mm

The Burris 410341 AR PEPR Mount positions a 30mm riflescope two inches forward on AR and M4 platforms. This forward placement establishes proper eye relief for combat-oriented optics. The one-piece ring base construction creates a rigid mounting platform. Integrated Picatinny tops on the ring caps accept additional accessories.

Thermals noise and power draw

This passive mechanical mount generates no heat and operates silently. It draws zero electrical power from the rifle system. The aluminium alloy construction withstands recoil and environmental exposure without thermal drift. No batteries or wiring are required for operation.

Picatinny tops add accessory options

The integrated Picatinny rails on each ring top allow direct attachment of backup sights, lights or laser aiming devices. This eliminates the need for separate rail sections on the receiver. Accessories co-witness with the primary optic through the same mounting platform. The system consolidates multiple devices onto a single rigid base.

Highlights

  • Proper eye position with 2" forward scope placement on AR/M4 platforms
  • Single-piece milled ring bases deliver a tough, unified mounting platform
  • Picatinny tops on ring caps allow direct accessory attachment
  • Designed specifically for 30mm combat riflescopes
  • Burris 410341 model built for AR PEPR applications

Specifications

BrandBurris

Questions about this item

How do I install the Burris 410341 30mm mount on my AR or M4 platform?

Place the single-piece milled base onto the Picatinny rail, torque the cross-bolts to the manufacturer's specification, then seat the scope in the rings and tighten the caps evenly. The step most people get wrong is skipping the forward 2" eye-relief offset before final torque.

What maintenance or replacement will the Burris 410341 mount need over time?

Re-check cross-bolt and ring-cap torque after the first few hundred rounds and periodically thereafter; inspect the Picatinny tops for burrs if accessories are swapped often. No scheduled parts replacement is required unless physical damage occurs.

What limit appears first on the Burris 410341 mount during sustained firing?

The primary limit is thermal expansion and vibration loosening the cross-bolts, which can shift the 2" forward scope position and degrade zero retention under prolonged strings of fire.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.