We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare copper compression lug, long barrel, tin finish, one 5/8 in stud hole

Burndy

Burndy YAD8CM16E58 One-Hole Compression Lug 8 AWG 5/8 in Stud Long

SKU CH-TPZM-RQX9R

One-hole copper compression lug accepts 8 AWG wire, fits a 5/8 in stud, and is UL 467 listed for 600 V

  • TypeElectrical Connectors
  • Crimp termination ensures secure connection for 8 AWG wire
  • Tin-plated copper contact resists corrosion at up to 600 V
  • Long brazed barrel provides extended crimp area for reliability
  • UL 467 listed for grounding and bonding applications
  • 1 in tongue width fits 5/8 in stud securely

One-Hole Compression Lug for 8 AWG

This Burndy compression lug accepts a single 8 AWG conductor and terminates it on a 5/8 inch stud. The long brazed barrel provides a generous crimp area for installers who need a secure, permanent connection in automotive, marine or industrial wiring jobs.

Practical limits of the 600 V crimp standard

The lug is rated for 600 volts and a maximum operating temperature of 302 degrees Fahrenheit. Tin-plated copper conducts reliably within those limits, but the bare barrel offers no insulation, so clearance to adjacent conductors must be managed by the installer.

Straightforward crimp install with common pitfalls

A properly sized crimp tool and the correct 8 AWG die produce a gas-tight joint in one squeeze. Undersized dies leave loose strands that overheat; oversized dies crack the barrel wall. Verify the 0.31 inch barrel length matches your tool’s nest before committing to the crimp.

Highlights

  • Crimp termination ensures secure connection for 8 AWG wire
  • Tin-plated copper contact resists corrosion at up to 600 V
  • Long brazed barrel provides extended crimp area for reliability
  • UL 467 listed for grounding and bonding applications
  • 1 in tongue width fits 5/8 in stud securely

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

Should I pick the 8 AWG long-barrel lug or a shorter barrel for my 8 AWG wire?

Choose the long-barrel version when you need the extra 0.31 in barrel length for a more secure crimp on 8 AWG copper wire; the short barrel offers less contact area.

What does the 600 V rating mean when the lug is installed in a panel?

The lug is rated for continuous operation up to 600 V, so it can be used in standard low-voltage power circuits without exceeding its insulation or contact limits.

How does the 5/8 in stud size affect which bolts I can use?

The 5/8 in stud hole accepts a 5/8 in bolt, limiting you to that fastener diameter; the 1.1 in tongue width provides the bearing surface for the connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.