We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper ring terminal, tin finish, single hole, 2/0 AWG

Burndy

Burndy YAD26M12E12 2/0 AWG One Hole Lug Compress Connector

SKU CH-KBF3-DNSC6

One-hole 2/0 AWG copper compression lug with tin finish, 600 V rating and 302 °F maximum temperature

  • TypeWire Connectors & Terminals
  • Handles up to 600 V for reliable power distribution
  • Operates up to 302 °F for demanding environments
  • Tin-plated copper contact resists corrosion for lasting conductivity
  • Brazed long barrel ensures strong crimp termination
  • UL 467 listed for safety compliance

2/0 AWG copper lug

The Burndy YAD26M12E12 is a one-hole compression connector designed for 2/0 AWG copper conductors. It features a brazed barrel with a tin-plated finish and accepts a maximum voltage of 600 V. The bare copper construction suits industrial and automotive wiring tasks that require a reliable crimp termination.

Installers needing a single-stud ring terminal

This lug suits electricians and maintenance teams terminating 2/0 AWG cable on a single bolt. It does not serve applications requiring insulated barrels, multi-hole pads or wire sizes outside the 2/0 AWG range. Buyers who need a different stud size or an insulated connector should look at an alternative part.

Crimp with a matching die set

Installation requires a compression tool fitted with the correct die for the long brazed barrel. The barrel outside diameter is .67 in and the barrel length is .71 in. A mismatched die or insufficient compression force can leave a loose joint that overheats under load.

Highlights

  • Handles up to 600 V for reliable power distribution
  • Operates up to 302 °F for demanding environments
  • Tin-plated copper contact resists corrosion for lasting conductivity
  • Brazed long barrel ensures strong crimp termination
  • UL 467 listed for safety compliance

Specifications

BrandBURNDY
TypeWire Connectors & Terminals

Questions about this item

What crimp tool and die size do I need to install this 2/0 AWG lug?

Use a hydraulic crimper with a die matched to the .67 in barrel outside diameter and .71 in barrel length for a proper long-barrel compression.

Can I connect this lug to a 1/2 inch stud on my existing bus bar?

The one-hole tongue is .91 in wide, which matches a 1/2 inch bolt pattern, so it will fit your current bus bar hardware.

How can I verify the connection meets the 600 V rating after crimping?

Inspect for a uniform crimp impression, measure barrel compression with a go/no-go gauge, and confirm tin-plated copper contact is fully seated against the stud.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.