We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, one-hole, red barrel, straight tongue

Burndy

Burndy YA8CL3BOX One-Hole Compression Lug 8 AWG 3/8 in Stud Short

SKU CH-Q6AX-1JAVC

Copper compression lug for 8 AWG stranded wire with 3/8 in stud, CSA and UL listed, rated to 35 kV and 194 °F

  • TypeElectrical Connectors
  • CSA certified and UL 486A-486B listed for code compliance
  • 35 kV AC rating handles high-voltage applications
  • Red color code 49 simplifies die selection
  • 194 °F maximum temperature suits demanding environments
  • 58 in tongue width fits 3/8 in stud securely

One-Hole Compression Lug for 8 AWG Copper

This Burndy YA8CL3BOX connector terminates a single 8 AWG stranded copper conductor to a 3/8 inch stud. It is built for installers who need a crimp-style lug rated for up to 35 kV AC and certified to UL 486A-486B and CSA standards.

Replaces loose or oversized ring terminals

The short barrel and straight tongue suit panels where space behind the bus bar is tight. The jump is worth it when the existing lug lacks an inspection hole or carries a lower temperature rating than the 194 Degrees F maximum listed here.

Holds rated current without creep

Copper construction and the red colour code 49 die match the conductor material, so the joint resists oxidation under sustained load. The inspection hole lets the installer verify full insertion before energising the circuit.

Highlights

  • CSA certified and UL 486A-486B listed for code compliance
  • 35 kV AC rating handles high-voltage applications
  • Red color code 49 simplifies die selection
  • 194 °F maximum temperature suits demanding environments
  • 58 in tongue width fits 3/8 in stud securely

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

What stud size and tongue width does this lug need for mounting?

The lug accepts a 3/8 in stud and has a tongue width of .58 in for a one-hole mount.

Which crimp die code is required and where is the inspection hole located?

Use die code 49 for the crimp termination; the inspection hole is on the barrel to verify wire insertion depth.

How often should the copper lug be inspected or replaced under continuous 194 Degrees F operation?

Inspect the crimp joint periodically for discoloration or loosening; replace the lug if corrosion or overheating signs appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.