We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug with single hole and blue barrel

Burndy

Burndy YA6CLNT6 compression lug 6 AWG #6 stud

SKU CH-5VK0-C6D9T

A one-hole copper compression lug for 6 AWG stranded wire with a #6 stud hole, blue colour code, 0.29 in tongue width, inspection window, CSA certified and UL listed to 486A-486B standards.

  • TypeElectrical Connectors
  • Copper lug rated 35 kV AC for high-voltage safety
  • Blue colour code 374 and die code 7 for quick tool selection
  • Inspection hole lets you verify crimp integrity
  • Straight tongue 0.29 in wide fits #6 stud precisely
  • UL 486A-486B and CSA certified for code compliance

One-hole compression lug for 6 AWG copper

This BURNDY copper lug accepts a single 6 AWG stranded copper conductor and terminates on a #6 stud. The standard-barrel design carries a blue colour code and die code 374 for quick identification. It is UL listed to UL 486A-486B and CSA certified for use up to 35 kV AC. An inspection hole lets the installer verify full conductor insertion before crimping.

Crimp termination with inspection hole

The crimp-style termination creates a permanent, low-resistance joint when compressed with the correct die. A built-in inspection hole provides visual confirmation that the conductor is fully seated, reducing the risk of incomplete crimps. The straight tongue and 0.29 in tongue width keep the connection compact in panel layouts. No additional hardware or insulating sleeves are included in the package.

Rated for 35 kV AC at 194 °F

The lug handles continuous operation at 194 °F while maintaining its 35 kV AC voltage rating. It is designed exclusively for 6 AWG stranded copper; smaller or larger conductors, solid wire, or aluminium cable are not supported. Installations requiring multi-hole mounting, angled tongues, or higher temperature ratings will need a different lug style.

Highlights

  • Copper lug rated 35 kV AC for high-voltage safety
  • Blue colour code 374 and die code 7 for quick tool selection
  • Inspection hole lets you verify crimp integrity
  • Straight tongue 0.29 in wide fits #6 stud precisely
  • UL 486A-486B and CSA certified for code compliance

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

Does the inspection hole let me verify the crimp without removing the lug?

Yes, the inspection hole provides visual confirmation that the conductor is fully seated after crimping.

Will the 35 kV AC rating hold under continuous load?

The lug is UL Listed to 486A-486B for 35 kV AC; sustained current should stay within the ampacity of the 6 AWG copper conductor.

How hot does the copper barrel get at the 194 °F maximum operating temperature?

The barrel can reach 194 °F under full rated load; ensure surrounding insulation and enclosures are rated for that temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.