We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, long barrel, one-hole, brown colour code

Burndy

Burndy YA34N One-Hole Compression Lug 500 kcmil 1/2 in Stud Long Barrel

SKU CH-1TY3-RV6FA

Connects 500 kcmil copper wire to a 1/2 in stud with a long-barrel crimp lug rated to 35 kV and 194 °F

  • TypeElectrical Connectors
  • Rated for 35 kV high-voltage applications
  • UL 486A-486B listed for code compliance
  • Long barrel design for secure crimp termination
  • Brown colour code 20 simplifies die selection
  • Operates up to 194 °F in demanding environments

Burndy YA34N Compression Lug 500 kcmil

The Burndy YA34N is a copper compression lug built for 500 kcmil stranded copper conductors. It features a long barrel and a single 1/2 inch stud hole with a straight tongue measuring 1.55 inches wide. The connector carries a brown color code and die code 20 299 for proper crimp tool selection.

Suited for 500 kcmil copper terminations up to 35 kV

Electricians and panel builders terminating a single 500 kcmil copper cable at 35 kV maximum will find this lug matches the conductor size and stud requirement. Installations that need an inspection window, a different stud diameter, or a shorter barrel length should select an alternative connector.

500 kcmil conductor size with 1/2 inch stud

The lug is rated for a minimum and maximum stranded copper wire size of 500 kcmil and a 1/2 inch stud. This single specification determines whether the connector fits the cable and the mounting hardware in the application.

Highlights

  • Rated for 35 kV high-voltage applications
  • UL 486A-486B listed for code compliance
  • Long barrel design for secure crimp termination
  • Brown colour code 20 simplifies die selection
  • Operates up to 194 °F in demanding environments

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

Does the 194 °F maximum operating temperature limit how much current I can push through this lug continuously?

The lug is rated for 194 °F maximum operating temperature, so continuous current must stay within the ampacity that keeps the copper below that limit in your specific installation.

What crimp tool and die do I need to terminate a 500 kcmil copper conductor in this lug?

Use a crimp tool that accepts Burndy die code 20 (also referenced as 299) to compress the long barrel onto 500 kcmil stranded copper.

Can I bolt this 1/2 in stud lug onto a bus bar drilled for 3/8 in hardware without an adapter?

No, the lug has a 1/2 in stud hole; it requires a matching 1/2 in bolt or stud and cannot be fastened directly to 3/8 in hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.