We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium lug with slotted head, 1.5 in long

Burndy

Burndy Wire Terminal Connector 14AWG 1.5In

SKU CH-NQXM-9QT1G

A lay-in lug for aluminium or copper conductors from 14 AWG to 1/0 AWG, rated 600 V and 194 °F with a 1/4 in stud hole

  • Length1.700
  • TypeCommercial
  • Handles copper and aluminum conductors for versatile installations
  • CSA certified and UL listed for code-compliant work
  • Rated to 600 V and 194 °F for demanding circuits
  • Lay-in lug design speeds single-conductor termination
  • Fits 14 AWG to 1/0 AWG stranded copper wire

Burndy 14AWG Lay-In Lug Connector

This aluminium lay-in lug accepts stranded copper or aluminium conductors from 14 AWG up to 1/0 AWG. It is rated for 600 V and a maximum operating temperature of 194 Degrees F. The connector carries CSA and UL certifications for commercial electrical installations.

Slotted Head For Straightforward Installation

The single-hole design with a slotted head allows termination using a standard screwdriver. The lay-in style lets the conductor slide in without looping, reducing the chance of loose strands or an uneven crimp that can cause hot spots.

Check Stud Size And Wire Range Before Ordering

Verify that your mounting stud measures 1/4 in to match the 0.28 in hole diameter. Ensure the conductor falls within the 14 AWG to 1/0 AWG stranded range and that the 0.8 in tongue length fits your enclosure space.

Highlights

  • Handles copper and aluminum conductors for versatile installations
  • CSA certified and UL listed for code-compliant work
  • Rated to 600 V and 194 °F for demanding circuits
  • Lay-in lug design speeds single-conductor termination
  • Fits 14 AWG to 1/0 AWG stranded copper wire

Specifications

BrandBurndy
Length1.700
TypeCommercial

Questions about this item

How can I confirm the connector is working correctly after installation?

Verify the stranded copper wire is fully seated in the lay-in lug, the slotted screw is tight on the 1/4 in stud, and the joint shows no discoloration after a load test up to 600 V.

What comes in the package and what must I supply?

The package contains the aluminum lay-in lug with a 0.28 in hole for a 1/4 in stud; you must provide 14 AWG to 1/0 AWG stranded copper or aluminum conductors and a slotted screwdriver.

Which version should I choose for a 14 AWG copper run on a 1/4 in stud?

This single model accepts 14 AWG through 1/0 AWG stranded copper, fits a 1/4 in stud with a 0.28 in hole, and is rated 600 V at 194 °F, so it covers that requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.