Burndy
Burndy U26RT Type U Crimping Die 12 ton 2/0 AWG
A 12 ton U-style crimping die for 2/0 AWG copper lugs, compatible with Burndy 35 and 750 series tools
- Crimps 2/0 AWG copper lugs securely
- 12-ton force rating handles heavy-duty applications
- U-style upper and lower die design
- Fits PAT46, PAT750, Y35, Y46, Y750 tools
- Black colour code identifies connector compatibility
Crimping die for 2/0 AWG copper lugs
The Burndy U26RT is an upper-and-lower U-style die set built for 2/0 AWG copper lugs and splices. It accepts connector types YA and YS marked with a black colour code. The die fits 12-ton tools including the PAT46, PAT750, PUADP1, Y35, Y46 and Y750 across the 35 Series and 750 Series platforms.
Full 12-ton force delivered across the die face
Under sustained crimping cycles the die transmits the tool's rated 12-ton force evenly over the U-profile groove. The hardened steel surfaces resist deformation so each compression meets the same dimensional standard from the first lug to the last. Heat buildup during repeated use does not alter the crimp geometry.
Single-cavity 2/0 AWG capacity
This die crimps only 2/0 AWG copper conductors; it cannot accommodate larger or smaller wire sizes. Installers who need multiple gauge ranges must carry additional die sets. The black colour code on the connector barrel confirms the correct match before the tool closes.
Highlights
- Crimps 2/0 AWG copper lugs securely
- 12-ton force rating handles heavy-duty applications
- U-style upper and lower die design
- Fits PAT46, PAT750, Y35, Y46, Y750 tools
- Black colour code identifies connector compatibility
Specifications
| Brand | BURNDY |
|---|
Questions about this item
How much force does the 12 ton U26RT die need from the tool to crimp 2/0 AWG copper lugs all day?
The die is rated for a maximum crimping force of 12 ton, so the tool must supply that pressure for each crimp on 2/0 AWG copper lugs.
Which Burndy tools accept the U26RT die so it will work in my existing kit?
It fits PAT46, PAT750, PUADP1, Y35, Y46 and Y750 tools in the 35 Series and 750 Series.
Will the U26RT die work with the Y35 tool I already own?
Yes, the U26RT is listed as compatible with the Y35 and the 35 Series.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
