We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper offset-tongue terminal, 2.56 in long, hex head, .34 in hole, .12 in tongue thickness

Burndy

Burndy Terminal Offset Tongue 2AWG 2.56In Copper

SKU CH-WZMN-HDHWM

Copper offset-tongue terminal for 2 AWG stranded wire with 5/16 in stud hole, rated 600 V and 194 °F

  • Length2.700
  • MaterialCopper
  • TypeCommercial
  • Copper construction ensures high conductivity
  • 56 in length fits standard stud spacing
  • 600 V rating supports heavy-duty circuits
  • 194 °F max temperature handles demanding environments
  • Single-hole design simplifies secure mounting

Offset Copper Terminal for 2 AWG Wire

This Burndy offset-tongue terminal accepts stranded copper conductors from 2 AWG up to 4/0 AWG and mounts on a single 5/16 inch stud. The hex-head design allows secure installation with standard tools for commercial electrical work.

600 V Rating with 194 °F Temperature Limit

Rated for 600 volts maximum, the copper body handles typical low-voltage power distribution. Continuous operation above 194 degrees Fahrenheit exceeds the design limit and risks connection degradation.

Single-Hole Mount with Fixed 0.34 Inch Clearance

The terminal provides one mounting hole of 0.34 inch diameter; hole spacing is not applicable. Builders needing multi-hole patterns, different stud sizes or tongue dimensions not matching 1 inch width by 0.12 inch thickness must select another part.

Highlights

  • Copper construction ensures high conductivity
  • 56 in length fits standard stud spacing
  • 600 V rating supports heavy-duty circuits
  • 194 °F max temperature handles demanding environments
  • Single-hole design simplifies secure mounting

Specifications

BrandBurndy
Length2.700
MaterialCopper
TypeCommercial

Questions about this item

Will the 0.34 in hole diameter and 5/16 in stud size match the existing bus bars in my panel?

The terminal has a single 0.34 in hole designed for a 5/16 in stud, so it fits standard bus-bar patterns using that hardware.

How can I confirm the crimp on 2 AWG copper is secure once installed?

After crimping, the hex-head body should show uniform compression with no visible gaps; a pull test at 600 V rating verifies mechanical integrity.

Does the package include mounting bolts or only the copper terminal itself?

Only the offset-tongue copper terminal is supplied; 5/16 in mounting hardware must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.