We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper offset-tongue terminal, hex head, 4.1 in long, 1.5 in wide, .18 in thick, .39 in hole

Burndy

Burndy Terminal Offset Tongue 1/0 AWG 4.1 In

SKU CH-AEVH-Y5JE8

Copper offset-tongue terminal accepts 1/0 AWG to 500 kcmil stranded copper, fits a 3/8 in stud, and rates 600 V at 194 °F

  • TypeCommercial
  • Offset tongue eases routing in tight panels
  • 1 in overall length spans longer runs
  • Rated 600 V for standard power circuits
  • Copper body handles up to 194 °F operating temperature
  • Accepts 1/0 AWG to 500 kcmil stranded copper

Burndy 1/0 AWG Copper Terminal

This Burndy offset-tongue terminal is a mechanical connector built for stranded copper conductors ranging from 1/0 AWG up to 500 kcmil. It accepts a single 3/8 inch stud through a 0.39 inch hole and uses a hex head for installation. The copper body carries a 600 V rating and is designed for commercial electrical and industrial wire applications.

Sustained-load performance

The copper body is rated for a maximum operating temperature of 194 degrees F, indicating its capacity under continuous current. A tongue thickness of 0.18 in and width of 1.5 in provide the cross-section that supports that thermal limit. The single-hole, single-conductor layout keeps the current path direct without parallel paths that could unbalance heating.

1/0 AWG minimum conductor size

This terminal requires a conductor no smaller than 1/0 AWG, so it will not suit circuits built with lighter gauge wire. Buyers working with #2 AWG or smaller conductors need a different connector. The maximum of 500 kcmil sets the upper bound, but the 1/0 AWG floor is the decisive spec for most installations.

Highlights

  • Offset tongue eases routing in tight panels
  • 1 in overall length spans longer runs
  • Rated 600 V for standard power circuits
  • Copper body handles up to 194 °F operating temperature
  • Accepts 1/0 AWG to 500 kcmil stranded copper

Specifications

BrandBurndy
TypeCommercial

Questions about this item

How hot does the copper body get at its 194 °F maximum operating temperature during continuous use?

The copper body is rated to operate safely up to 194 °F, so it will not exceed that temperature under normal load conditions.

What wire size and stud hardware do I need to install this 1/0 AWG offset tongue terminal?

It accepts stranded copper from 1/0 AWG up to 500 kcmil and mounts on a 3/8 in stud with a .39 in hole diameter.

Will the 1.5 in tongue width and .18 in thickness fit the same bus-bar slots as my existing 1/0 AWG lugs?

The tongue measures 1.5 in wide by .18 in thick, so it matches standard 1/0 AWG lug dimensions for direct replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.