We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Burndy

Burndy Terminal Offset Tongue 1/0 AWG 2.83 in

SKU CH-FM8Z-YKT2B

Offset-tongue copper terminal for 1/0 AWG to 350 kcmil stranded wire, 600 V rated, 3/8 in stud hole, 1.1 in tongue width, 0.12 in thickness, 2.83 in overall length

  • Length3.000
  • MaterialCopper
  • TypeCommercial
  • Offset tongue simplifies routing in tight panels
  • Copper body ensures high conductivity and corrosion resistance
  • Rated 600 V and 194 °F for demanding commercial use
  • Fits 1/0 AWG to 350 kcmil stranded copper conductors
  • Single 3/8 in stud hole with hex head for secure fastening

Burndy 1/0 AWG Copper Terminal

This Burndy offset-tongue terminal is a mechanical connector made from solid copper for commercial electrical work. It accepts stranded copper conductors from 1/0 AWG up to 350 kcmil and terminates them on a single 3/8 inch stud. The hex head allows standard tool engagement for a secure crimp.

Replaces Ring or Straight Lugs on Large Gauge Wire

The offset tongue moves the connection point away from the conductor axis, clearing obstructions where a straight lug would foul a barrier or adjacent hardware. The jump is worth it when panel depth or bus-bar spacing prevents a direct lug fit, and the 600 V rating covers standard low-voltage distribution.

Fits Single-Hole 3/8 in Stud Patterns

The terminal mounts on a 0.39 inch diameter hole with a 1.1 inch tongue width and 0.12 inch thickness, requiring only a matching stud and hex driver. It frees up space behind the connection by angling the cable entry, and the 194 °F temperature limit suits typical enclosure ambient conditions.

Highlights

  • Offset tongue simplifies routing in tight panels
  • Copper body ensures high conductivity and corrosion resistance
  • Rated 600 V and 194 °F for demanding commercial use
  • Fits 1/0 AWG to 350 kcmil stranded copper conductors
  • Single 3/8 in stud hole with hex head for secure fastening

Specifications

BrandBurndy
Length3.000
MaterialCopper
TypeCommercial

Questions about this item

What stud size and hole diameter does the 1/0 AWG offset tongue terminal accept?

The terminal is drilled for a 3/8 in stud with a 0.39 in hole diameter.

How is the connector secured to the copper conductor, and what tool setting is often missed?

A hex-head set screw clamps the stranded copper wire; the installer must torque the hex to the manufacturer value or the joint will loosen.

When should the copper terminal be inspected or replaced in service?

Inspect at any sign of discoloration or heat damage; the maximum operating temperature is 194 degrees F, so sustained higher heat means replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.