We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, tin finish, single hole, belled barrel, 2.700 length

Burndy

Burndy Std Belled Barrel CU Lug 1 Hole 2/0 AWG

SKU CH-KA9C-BBFT0

Copper compression lug with belled barrel for 2/0–3/0 AWG stranded wire, CSA certified and UL listed to 35 kV

  • Length2.700
  • TypeCommercial
  • Belled barrel eases cable insertion
  • Tin-plated copper resists corrosion
  • Rated for 35 kV maximum voltage
  • Withstands 194 °F operating temperature
  • UL 486 and CSA certified safety

Burndy Copper Compression Lug

The Burndy standard belled barrel lug is a copper compression connector designed for terminating stranded copper conductors. It accepts 2/0 AWG and 3/0 AWG wire sizes and features a single mounting hole for 1/2 inch studs. The barrel carries an orange colour code and die code 1 for tool selection. This component is suited for commercial electrical installations requiring a secure crimp connection.

Verify Wire Size And Stud Requirements

Before ordering, confirm that your stranded copper conductors are 2/0 AWG or 3/0 AWG to match the barrel capacity. Ensure the mounting hardware uses a 1/2 inch stud so the single hole aligns correctly. Check that your crimping tool supports die code 1 for the orange colour code. The lug is rated for a maximum operating temperature of 194 degrees F and a maximum voltage of 35 kV.

Suits Commercial Copper Terminations

This lug suits electricians and panel builders making straight barrel compression joints on stranded copper wire in commercial settings. It meets CSA certification and UL 486A-486B standards for listed applications. Buyers needing a multi-hole mounting pattern or a different barrel length should look at alternative connector styles. The 2.700 inch length and tin-plated finish are fixed specifications for this model.

Highlights

  • Belled barrel eases cable insertion
  • Tin-plated copper resists corrosion
  • Rated for 35 kV maximum voltage
  • Withstands 194 °F operating temperature
  • UL 486 and CSA certified safety

Specifications

BrandBurndy
Length2.700
TypeCommercial

Questions about this item

Does the lug arrive ready to crimp, or do I need to buy a die separately?

The lug is a complete belled-barrel compression fitting; a compatible die coded 1 or 021 is required for crimping and is sold separately.

Which wire sizes does the orange colour code cover?

The orange colour code identifies this lug for 2/0 AWG and 3/0 AWG stranded copper conductors.

What does the 35 kV rating mean for my installation?

The lug is UL 486A-486B listed and CSA certified for use up to 35 kV, so it meets the voltage withstand requirement for medium-voltage copper terminations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.