We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, straight tongue, red colour code, 350 kcmil, 1/2 in stud

Burndy

Burndy Std Barrel CU Terminal 1 Hole 350 kcmil

SKU CH-A9VQ-PVYJ8

Copper compression lug for 350 kcmil stranded wire, 1/2 in stud, 1.29 in tongue, red colour code, die 18/324, rated 35 kV AC and 194 °F

  • TypeCommercial
  • Copper construction ensures high conductivity for 350 kcmil conductors
  • Standard barrel fits 350 kcmil stranded copper wire with 1.29 in tongue width
  • One-hole design accepts 1/2 in stud for secure mounting
  • Red colour code and die code 18 simplify crimp tool selection
  • Rated 35 kV AC and 194 °F for demanding commercial applications

Copper Compression Lug for 350 kcmil

The Burndy one-hole lug is a copper compression connector built for 350 kcmil stranded copper conductors. It suits commercial electrical installations where a single 1/2 inch stud termination is required. The straight tongue measures 1.29 inches wide and includes an inspection hole for visual verification. This lug is sold new and rated for copper conductor material only.

Crimp Termination Limits at 35 kV AC

The connector uses a standard barrel with red colour code and die code 18/324 for crimp termination. It carries a maximum voltage rating of 35 kV AC and a maximum operating temperature of 194 degrees Fahrenheit. The design is fixed to a single conductor size with no range above or below 350 kcmil. No multi-hole or angled tongue options are provided with this part.

Fixed Capacity for Single-Size Conductors

The lug comfortably handles exactly 350 kcmil stranded copper wire with no minimum or maximum variation. It runs out of headroom immediately if the conductor size differs or if a larger stud than 1/2 inch is needed. Installers requiring multiple holes, different tongue angles, or mixed conductor sizes must select a different connector.

Highlights

  • Copper construction ensures high conductivity for 350 kcmil conductors
  • Standard barrel fits 350 kcmil stranded copper wire with 1.29 in tongue width
  • One-hole design accepts 1/2 in stud for secure mounting
  • Red colour code and die code 18 simplify crimp tool selection
  • Rated 35 kV AC and 194 °F for demanding commercial applications

Specifications

BrandBurndy
TypeCommercial

Questions about this item

Should I pick the 350 kcmil lug or a different size for my cable?

This lug is built for a single 350 kcmil stranded copper conductor; choose it only when your cable matches that exact size.

What does the 35 kV AC rating mean once the lug is installed?

The 35 kV AC maximum voltage indicates the insulation level the crimped connection can withstand in service.

How does the 1/2 in stud size limit the connection?

The 1/2 in stud fixes the bolt diameter, so the lug fits only hardware with that hole spacing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.