We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Burndy aluminium stacking adaptor, 1 inch wide, hex head, two conductor ports

Burndy

Burndy Stacking Adaptor 1/0 AWG 1 in

SKU CH-NEV6-58P4P

Stacking adaptor connects two 1/0 AWG to 250 kcmil aluminium or copper conductors with a one-inch hex head, rated 600 V and 194 °F

  • TypeCommercial
  • Handles aluminum and copper conductors for versatile installations
  • Rated to 600 V for reliable power distribution
  • Operates up to 194 °F in demanding environments
  • Stacks two conductors in a compact 1 in tongue
  • Commercial-grade aluminum body resists corrosion and wear

Burndy Stacking Adaptor 1/0 AWG

This Burndy stacking adaptor accepts stranded copper conductors from 1/0 AWG up to 250 kcmil and provides two termination positions in a single aluminium body. It is designed for commercial electrical installations where parallel connections are required. The hex-style head allows standard tool engagement for secure tightening.

Thermals noise and power draw

The aluminium body operates at temperatures up to 194 degrees Fahrenheit and is rated for 600 volts maximum. As a passive mechanical connector it produces no noise and draws no power during normal use. Heat dissipation depends entirely on the conductor size and ambient conditions of the installation.

Commercial aluminium connector benefits

The commercial-grade aluminium construction resists corrosion in typical industrial environments and accommodates both aluminium and copper conductors. Its one-inch tongue width matches standard lug spacing for panel-board and switchgear applications. The two-hole configuration simplifies stacking without additional hardware.

Highlights

  • Handles aluminum and copper conductors for versatile installations
  • Rated to 600 V for reliable power distribution
  • Operates up to 194 °F in demanding environments
  • Stacks two conductors in a compact 1 in tongue
  • Commercial-grade aluminum body resists corrosion and wear

Specifications

BrandBurndy
TypeCommercial

Questions about this item

How do I install the Burndy stacking adaptor and which torque step is most often missed?

Insert each conductor into the two ports, then tighten the hex-head set screws to the manufacturer's specified torque; the step most often missed is verifying torque with a calibrated wrench instead of hand-tightening.

What maintenance or replacement will the Burndy stacking adaptor need over time?

Periodically inspect the aluminium body and hex screws for corrosion or loosening; re-torque the set screws if thermal cycling has reduced clamping force, and replace the adaptor if the body shows pitting or cracking.

Which limit appears first on the Burndy stacking adaptor during sustained high-current use?

The 194 °F maximum operating temperature is typically reached before the 600 V voltage rating becomes a concern, so thermal rise under continuous load is the limiting factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.