We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper terminal, side entry, hex head, .25 in thick

Burndy

Burndy Side Entry Terminal 3/0 AWG Copper .25 in Thick

SKU CH-8XDG-X8BC6

Copper side-entry terminal accepts 3/0–4/0 AWG stranded wire with a 3/8 in stud hole and 194 °F rating

  • TypeCommercial
  • Copper construction ensures high conductivity for reliable connections
  • Rated 600 V for safe operation in commercial systems
  • Withstands 194 °F maximum temperature in demanding environments
  • Side-entry design simplifies installation in tight panels
  • Hex head allows secure fastening with standard tools

Side-Entry Terminal for Copper Conductors

This Burndy terminal accepts stranded copper wire from 3/0 AWG up to 4/0 AWG and terminates it with a single 3/8 in stud hole. The hex-head design allows standard tool engagement for secure fastening in commercial electrical installations. Rated for 600 V and a maximum operating temperature of 194 Degrees F, it suits panel and enclosure wiring where reliable copper-to-copper connections are required.

Behaviour Under Sustained Load

The copper body maintains consistent conductivity at the full 600 V rating and up to the 194 Degrees F temperature limit during continuous operation. With a tongue thickness of .25 in and a single termination point, the connector resists loosening and heat rise when subjected to steady current rather than brief surges. The mechanical crimp on 3/0 to 4/0 AWG conductors provides stable contact resistance over extended duty cycles.

Compatibility Checks Before Ordering

Verify that your conductor is stranded copper within the 3/0 AWG to 4/0 AWG range and that the mounting hardware matches a 3/8 in stud with a .41 in hole diameter. Ensure the available space accommodates the 1.06 in tongue length and 1 in tongue width for proper alignment. Confirm the system voltage does not exceed 600 V and that the operating environment stays within the 194 Degrees F maximum temperature rating.

Highlights

  • Copper construction ensures high conductivity for reliable connections
  • Rated 600 V for safe operation in commercial systems
  • Withstands 194 °F maximum temperature in demanding environments
  • Side-entry design simplifies installation in tight panels
  • Hex head allows secure fastening with standard tools

Specifications

BrandBurndy
TypeCommercial

Questions about this item

Will the copper terminal run hot when carrying 600 V all day?

The terminal is rated for a maximum operating temperature of 194 °F under full 600 V load, so it stays within spec during continuous use.

What conductor size and stud hardware do I need to install this terminal?

It accepts stranded copper from 3/0 to 4/0 AWG and mounts on a 3/8 in stud with a .41 in clearance hole.

Can I pair this .25 in thick terminal with existing 4/0 AWG copper bus bars?

Yes, the .25 in tongue thickness matches standard 4/0 AWG copper bus bar landings for a flush connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.