We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze pipe ground clamp for 2.5 to 4 inch pipe, 6.25 inch length

Burndy

Burndy Pipe Ground Clamp 10AWG 6.25In

SKU CH-DF5Q-YM6NY

Connects grounding wire 10 to 2 AWG to copper pipe 2 1/2 to 4 inches, UL467 listed

  • Length5.900
  • TypeCommercial
  • Fits 2½ to 4 in pipe diameters
  • Accepts 10 to 2 AWG solid or stranded copper wire
  • Bronze construction resists corrosion
  • UL 467 listed for grounding safety
  • 25 in overall length for easy installation

Ground clamp for copper pipe

This Burndy ground clamp connects a single copper grounding conductor to water pipe or copper tubing. It accepts solid or stranded wire from 10 AWG up to 2 AWG. The bronze body is UL listed to UL467 for commercial grounding applications. Installers use it where a reliable pipe bond is required.

Thermal and electrical performance

The bronze construction provides a low-resistance path for fault current without overheating under normal load. No moving parts or active cooling are present, so the clamp operates silently. Power draw is not applicable to this passive mechanical connector. The UL467 listing confirms it meets standard temperature-rise limits for grounding hardware.

Replaces older pipe clamps

This clamp replaces worn or non-listed pipe clamps on 2 1/2 in to 4 in pipe. The upgrade is worth it when the existing clamp cannot accept 2 AWG conductor or lacks UL467 certification. It is not for use with aluminium conductors, pipes outside the stated range, or installations requiring more than one grounding wire per clamp.

Highlights

  • Fits 2½ to 4 in pipe diameters
  • Accepts 10 to 2 AWG solid or stranded copper wire
  • Bronze construction resists corrosion
  • UL 467 listed for grounding safety
  • 25 in overall length for easy installation

Specifications

BrandBurndy
Length5.900
TypeCommercial

Questions about this item

How do I install this clamp on a 2 1/2 to 4 inch pipe and which step is commonly missed?

Position the bronze clamp around the copper pipe, insert the 10 to 2 AWG grounding wire, then tighten the mechanical connector securely; the step often missed is verifying the wire is fully seated before final torque.

What maintenance or replacement will this ground clamp need over time?

Inspect the bronze body and mechanical screw annually for corrosion or loosening; replace the clamp if the threads strip or the conductor shows oxidation at the contact point.

What limit appears first when this clamp carries sustained fault current?

The UL 467 listed mechanical connection to the 2 1/2 to 4 inch pipe will reach its thermal and mechanical rating before the 10 to 2 AWG copper conductor does.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.