We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium panelboard lug with hex socket head and single mounting hole

Burndy

Burndy Panelboard Lug 6AWG 3In Commercial Aluminum Copper 600V

SKU CH-SFCP-E7WC1

Connects 6 AWG to 300 kcmil aluminum or copper conductors in 600 V panelboards

  • TypeCommercial
  • Commercial-grade reliability for panelboard installations
  • Accepts aluminum or copper conductors from 6 AWG to 300 kcmil
  • Rated for 600 V maximum voltage in industrial systems
  • Withstands operating temperatures up to 194 °F
  • Single-hole hex-socket lug with 0.33 in hole diameter for 5/16 in stud

Panelboard Lug 6 AWG 600 V

This Burndy mechanical connector accepts stranded copper or aluminum conductors from 6 AWG up to 300 kcmil. It is designed for commercial electrical panels operating at up to 600 volts. The single-hole lug fits a 5/16 inch stud and uses a hex socket for tightening. Two conductors can be terminated in the single barrel.

Capacity headroom from 6 AWG to 300 kcmil

The lug comfortably handles a wide range of conductor sizes within the 6 AWG to 300 kcmil window. It runs out of capacity beyond 300 kcmil or for conductors smaller than 6 AWG. The single-hole design limits each lug to one mounting point. Installations requiring multiple mounting holes per lug cannot use this model.

Thermals noise and power draw

The aluminum body is rated for a maximum operating temperature of 194 degrees Fahrenheit under load. As a passive mechanical connector, it generates no noise and draws no power during normal operation. Heat dissipation depends on the conductor size and ambient conditions within the panelboard.

Highlights

  • Commercial-grade reliability for panelboard installations
  • Accepts aluminum or copper conductors from 6 AWG to 300 kcmil
  • Rated for 600 V maximum voltage in industrial systems
  • Withstands operating temperatures up to 194 °F
  • Single-hole hex-socket lug with 0.33 in hole diameter for 5/16 in stud

Specifications

BrandBurndy
TypeCommercial

Questions about this item

Will this 600 V lug fit on the 5/16 in studs of my existing panelboard?

Yes — the lug is drilled for a 5/16 in stud and the 0.33 in hole diameter matches standard panelboard hardware.

How can I verify the connection is sound after torquing the hex-socket head?

A proper crimp shows full conductor insertion to the 0.94 in tongue length with no visible strands and the hex socket fully seated.

Does the package include mounting bolts or just the aluminium lug body?

Only the lug body is supplied; 5/16 in mounting hardware must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.