We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium multi-tap connector, three ports, L-entry, clear plastisol insulation

Burndy

Burndy Multi Tap Connector 14AWG 2.19In 3 Ports L Entry

SKU CH-YD3Y-0GAPZ

Three-port aluminium connector accepts 14 AWG to 2/0 AWG stranded copper or aluminium wire, rated 600 V with plastisol insulation and UL 94 V-0 flammability

  • Type3 Ports, Single Sided Entry, L
  • 3-port L-entry layout simplifies multi-wire routing
  • 14–2/0 AWG range covers copper and aluminum conductors
  • Plastisol insulation rated UL 94 V-0 resists flame up to 194 °F
  • Hex-head 3/16 in set screws secure connections at 600 V
  • Unplated aluminum body meets RoHS for clean installations

Three-Port Aluminium Multitap

The Burndy multitap connector provides three ports with single-sided L entry for joining aluminium or copper conductors. It accepts stranded copper wire from 14 AWG up to 2/0 AWG and is rated for 600 V at up to 194 °F. The clear plastisol insulation carries a UL 94 V-0 flammability rating and the body is RoHS compliant.

Upgrade From Single-Tap Blocks

This connector replaces individual tap blocks or split-bolt arrangements when you need to branch three conductors from one feed in a compact 2.19 in body. The jump is worth it when panel space is tight and a single hex-driven connection per port speeds installation compared with multiple separate lugs.

Verify Conductor Range And Hex Tool

Confirm that each conductor falls within the 14 AWG to 2/0 AWG stranded copper or aluminium range before ordering. Ensure a 3/16 in hex driver is available for the set-screw ports and that the 600 V rating matches your circuit voltage. The unit has no mounting holes, so plan for free-hanging or bracket-supported installation.

Highlights

  • 3-port L-entry layout simplifies multi-wire routing
  • 14–2/0 AWG range covers copper and aluminum conductors
  • Plastisol insulation rated UL 94 V-0 resists flame up to 194 °F
  • Hex-head 3/16 in set screws secure connections at 600 V
  • Unplated aluminum body meets RoHS for clean installations

Specifications

BrandBurndy
Type3 Ports, Single Sided Entry, L

Questions about this item

What size hex key is required for the 3/16 in hex head on this connector?

The connector uses a 3/16 in hex head, so a 3/16 in hex key or driver is needed to tighten the set screws securely.

How do you install the connector onto stranded copper wires ranging from 14 AWG to 2/0 AWG?

Strip each wire, insert fully into the three ports, then tighten the hex set screws; the common error is not seating the conductor completely before torquing.

When should the plastisol-insulated aluminum body be inspected or replaced?

Inspect periodically for cracked insulation, corrosion, or overheating signs; replace if the V-0 rated plastisol degrades or the 194 °F temperature limit is exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.