We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear insulated aluminium multi-tap connector, four ports, single-sided entry, 1.95 in long

Burndy

Burndy Multi Tap Connector 14AWG 1.95In 4 Ports

SKU CH-HMG8-NZM7M

Four-port aluminium multitap connector for 14–4 AWG copper or aluminium wire, rated 600 V and 194 °F, UL and CSA listed

  • Type4 Ports, Single Sided Entry, L
  • Four-port design simplifies multi-wire connections
  • Single-sided entry eases installation in tight spaces
  • Aluminium body accepts copper and aluminium conductors
  • Plastisol insulation rated to 194 °F and 600 V
  • UL 486A/486B and CSA approved for code compliance

Four-port insulated connector

Burndy supplies a clear plastisol-insulated multitap connector rated for 600 V and 194 °F. The aluminium body accepts stranded copper or aluminium conductors from 14 AWG up to 4 AWG across four ports with single-sided entry. Hex-head set screws use a 1/8 in key and the unit carries CSA approval plus UL 486A and 486B listings. RoHS compliant.

Installers joining multiple conductors in one block

Electricians and panel builders who need a compact, single-entry junction for up to four wires will find the connector fits the task. The 1.95 in length keeps the footprint small inside enclosures. Users who require feed-through ports, mounting holes or a higher temperature rating should look at alternative connector styles.

Four ports with single-sided entry

The port count and entry layout determine whether the connector matches the wiring plan. Four ports allow up to four conductors to be landed in one block, while single-sided entry means all wires approach from the same direction. Verify that the conductor range and 600 V rating suit the circuit before specifying.

Highlights

  • Four-port design simplifies multi-wire connections
  • Single-sided entry eases installation in tight spaces
  • Aluminium body accepts copper and aluminium conductors
  • Plastisol insulation rated to 194 °F and 600 V
  • UL 486A/486B and CSA approved for code compliance

Specifications

BrandBurndy
Type4 Ports, Single Sided Entry, L

Questions about this item

What voltage does the UL 486A and UL 486B listing cover for this 4‑port connector?

The connector is UL Listed to UL 486A and UL 486B standards and rated for a maximum of 600 V.

What clearance does the 1.95 inch body and hex head need for installation?

The insulated body measures 1.95 inches long and uses a 1/8 inch hex head; allow space for the tool swing radius around the single‑sided entry ports.

How do you torque the set screws correctly on the aluminium body?

Insert stripped stranded copper or aluminium conductors (14 AWG to 4 AWG) into each port, then tighten the 1/8 inch hex screws to the manufacturer’s specified torque — under‑tightening is the common mistake that leads to high resistance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.