We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Burndy GAR6426 copper pipe ground clamp, 2.88in wide, commercial finish

Burndy

Burndy GAR6426 Pipe Ground Clamp 2.88in

SKU CH-GBFG-E7DKJ

Mechanical grounding clamp for 4 AWG to 2/0 AWG copper wire on 2.88in pipe, rebar or rod, UL 467 listed for direct burial

  • Length3.500
  • TypeCommercial
  • UL 467 listed for direct burial
  • Copper body connects 4 AWG to 2/0 AWG conductors
  • Fits 3/8 in pipe, 5/8–3/4 in rod, #5–#6 rebar
  • Single-wire mechanical clamp, 3.500 in length
  • Commercial-grade grounding for copper wire systems

Product identity

The Burndy GAR6426 is a copper mechanical grounding clamp designed for direct burial applications. It connects a single grounding conductor to pipe, ground rod or rebar in commercial electrical installations.

Upgrade scope

This clamp replaces older connectors that lack UL467 direct-burial listing or that accept a narrower wire range. The jump is worth it when a project requires a listed connector for 4 AWG solid through 2/0 AWG stranded copper conductors.

Compatibility checks

Verify that the conductor is copper and falls within the 4 AWG solid to 2/0 AWG stranded range. Confirm the mounting surface matches 3/8 inch pipe, 5/8 to 3/4 inch ground rod or #5 to #6 rebar before ordering.

Highlights

  • UL 467 listed for direct burial
  • Copper body connects 4 AWG to 2/0 AWG conductors
  • Fits 3/8 in pipe, 5/8–3/4 in rod, #5–#6 rebar
  • Single-wire mechanical clamp, 3.500 in length
  • Commercial-grade grounding for copper wire systems

Specifications

BrandBURNDY
Length3.500
TypeCommercial

Questions about this item

What pipe or rod sizes will the GAR6426 clamp fit?

The clamp accepts 3/8 inch pipe, 5/8 inch to 3/4 inch ground rod, and #5 to #6 rebar for grounding connections.

How do you install the Burndy GAR6426 and what step is often missed?

Place the clamp over the pipe or rod, insert the copper conductor into the wire groove, then tighten the bolts evenly to secure both the pipe and the conductor.

Does the GAR6426 require any maintenance after direct burial installation?

The UL 467 listed copper body is rated for direct burial with no scheduled maintenance; inspect only if the grounding system is disturbed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.