We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat tinned copper braid 24 in long with ferrule ends

Burndy

Burndy Flexible Copper Braid 24 in 190 A Indoor 225 A Outdoor

SKU CH-HT1A-JF00A

Tinned copper grounding braid, 24 in long with ferrules both ends, rated 190 A indoor and 225 A outdoor

  • Length24"
  • TypeCommercial
  • 190 A indoor rating for reliable grounding
  • 225 A outdoor capacity handles higher loads
  • 24 in overall length suits panel spacing
  • Tinned copper braid with ferrules on both ends
  • UL 467 and CSA listed for code compliance

Grounding Braid for Electrical Installations

This flexible copper braid provides a 24-inch grounding connection rated at 190 amps indoors and 225 amps outdoors. It comes with tinned copper ferrules on both ends for secure attachment. The braid meets CSA and UL 467 standards for safety compliance.

Upgrading from Rigid or Undersized Conductors

Replace solid ground wires or narrower braids that cannot handle the required fault current or that fatigue under vibration. The jump is worth it when installations demand a listed 1-inch wide braid with 2-hole ferrules spaced at 1.25-inch centers for reliable bonding.

Verify Mounting Hole Pattern and Current Needs

Confirm the 0.44-inch hole diameter and 1.25-inch center-to-center spacing match your lug or busbar layout. Ensure the 190-amp indoor and 225-amp outdoor ratings satisfy the fault-current requirements of the specific circuit being grounded.

Highlights

  • 190 A indoor rating for reliable grounding
  • 225 A outdoor capacity handles higher loads
  • 24 in overall length suits panel spacing
  • Tinned copper braid with ferrules on both ends
  • UL 467 and CSA listed for code compliance

Specifications

BrandBurndy
Length24"
TypeCommercial

Questions about this item

What hole size and spacing do I need to mount the 24 in grounding braid?

Each ferrule has two holes of 0.44 in diameter spaced 1.25 in centre to centre, with 0.62 in from hole centre to the ferrule end.

How do I install the braid correctly, and what step is often missed?

Bolt the tinned copper ferrules to clean metal surfaces using both holes per end; the common mistake is using only one bolt which reduces contact area and ampacity.

When should I replace this grounding braid?

Replace it if the tinned copper braid shows corrosion, the 0.13 in thick ferrules are cracked, or the 190 A indoor and 225 A outdoor ratings can no longer be met.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.