We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow copper compression lug straight barrel 2.600 in long 1.11 in tongue 1/2 in stud hole

Burndy

Burndy Copper Compression Lug 250 kcmil 1/2 in Stud 1 Hole Yellow 16 2.600 in

SKU CH-AVT0-4AWJ0

Copper compression lug for 250 kcmil stranded wire with 1/2 in stud hole, yellow colour code 16, 2.600 in length, UL and CSA listed to 35 kV

  • Length2.600
  • MaterialCopper
  • TypeCommercial
  • Copper construction ensures high conductivity
  • Yellow colour code 16 simplifies correct die selection
  • 11 in tongue width fits 1/2 in stud securely
  • UL 486A-486B and CSA certified for code compliance
  • Rated 35 kV and 194 °F for demanding applications

Burndy 250 kcmil Copper Lug

This Burndy copper compression lug accepts a single 250 kcmil stranded copper conductor and terminates it with a 1/2 in stud hole. The standard-barrel design carries a yellow colour code and die code 16 for quick identification. It is UL Listed and CSA Certified for use up to 35 kV. Maximum operating temperature is 194 Degrees F.

Verify conductor and tooling

Confirm the wire is stranded copper sized exactly 250 kcmil, as the lug accommodates no other gauge. Ensure your crimping tool accepts die code 16 and that the stud on your busbar or terminal block matches the 1/2 in hole. Check that the 1.11 in tongue width fits the available space and that the 2.600 in overall length clears adjacent hardware.

Inspection hole simplifies installation

The built-in inspection hole lets you visually confirm full conductor insertion before crimping, reducing the risk of incomplete terminations. Straight tongue orientation keeps the cable run direct without added bends. Yellow colour coding and die code 16 markings speed up tool selection on busy job sites. Compliance with UL 486A-486B and CSA standards supports code-compliant installations.

Highlights

  • Copper construction ensures high conductivity
  • Yellow colour code 16 simplifies correct die selection
  • 11 in tongue width fits 1/2 in stud securely
  • UL 486A-486B and CSA certified for code compliance
  • Rated 35 kV and 194 °F for demanding applications

Specifications

BrandBurndy
Length2.600
MaterialCopper
TypeCommercial

Questions about this item

Does the lug come with the crimp die or must I buy the 16 die separately?

The lug is colour-coded yellow for die code 16; the die itself is not included and must be purchased separately.

Should I select a different barrel length or stud size for 250 kcmil copper wire?

This lug has a standard barrel length of 2.600 in and a 1/2 in stud hole; both are fixed for this part number.

What does the 35 kV rating mean when the lug is crimped onto 250 kcmil cable?

The UL 486A-486B listing confirms the termination is rated for up to 35 kV when properly crimped on 250 kcmil copper conductor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.