We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, black finish, two 3/8-inch holes, straight tongue, 3.600-inch length

Burndy

Burndy Copper Compression Lug 2 Hole 2/0 AWG 3/8 in Stud Black Die 13

SKU CH-V1GX-NPM0Q

Copper compression lug with two 3/8-inch stud holes on one-inch centres, black die code 13, rated to 35 kV and 194 °F

  • Length3.600
  • MaterialCopper
  • TypeCommercial
  • Copper construction ensures high conductivity
  • Two-hole design provides secure mounting
  • Black die code 13 enables quick identification
  • CSA certified and UL listed for safety compliance
  • Rated up to 35 kV and 194 °F operating temperature

Copper Compression Lug 2/0 AWG

The Burndy copper compression lug accepts a single 2/0 AWG stranded copper conductor. Two mounting holes spaced 1 in centre-to-centre suit a 3/8 in stud. The straight tongue measures .83 in wide and the barrel length is 3.600 in.

Upgrade from single-hole or smaller lugs

This lug replaces a single-hole terminal when vibration or thermal cycling demand a second bolt. The jump is worth it when the installation must meet CSA and UL 486A-486B listings for 35 kV service.

Rated for 35 kV and 194 °F

The copper barrel and black die code 13 handle continuous operation up to 194 Degrees F at the full 35 kV rating. An inspection hole confirms full conductor insertion before the crimp is made. It is not suited for conductors larger than 2/0 AWG or for aluminium wire.

Highlights

  • Copper construction ensures high conductivity
  • Two-hole design provides secure mounting
  • Black die code 13 enables quick identification
  • CSA certified and UL listed for safety compliance
  • Rated up to 35 kV and 194 °F operating temperature

Specifications

BrandBurndy
Length3.600
MaterialCopper
TypeCommercial

Questions about this item

What stud size and hole spacing does this lug require for mounting?

The lug uses a 3/8 in stud with two holes spaced 1 in centre-to-centre.

Which crimp die and inspection feature should be used during installation?

Use the black die coded 13 and verify the crimp through the inspection hole.

What temperature limit applies to this copper lug in service?

It is rated for a maximum operating temperature of 194 Degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.