We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium multitap connector, clear unplated finish, two hexagonal ports

Burndy

Burndy BISR2 Multitap Connector Aluminum Clear Hex 2 Port

SKU CH-GE98-BAJAX

Aluminium two-port multitap connector accepts 14 AWG to 2 AWG stranded copper or aluminium wire, rated 600 V and 194 °F with hex drive

  • TypeElectrical Connectors
  • Two-port design simplifies dual-conductor splicing
  • Aluminum body accepts both copper and aluminum wire
  • Hex-head 5/32 in drive enables fast torque-controlled installation
  • Plastisol insulation rated UL 94 V-0 resists flame spread
  • UL 486A/B and CSA listed for 600 V service

Burndy BISR2 Aluminium Multitap Connector

This two-port multitap connector is built from unplated aluminium with a clear plastisol insulation. It accepts stranded copper conductors from 14 AWG up to 2 AWG and is rated for 600 V at temperatures up to 194 °F. The hex-head design uses a 5/32 in key for secure termination.

Installers joining two aluminium or copper wires

Electricians and maintenance technicians who need a compact, UL-listed tap for lighting, control or power circuits will find the connector straightforward. It is not suited for applications requiring more than two ports, conductors larger than 2 AWG, or environments exceeding the 194 °F temperature limit.

Fits into panels and junction boxes needing a dual

The connector mounts without a dedicated mounting hole, leaving flexibility for DIN-rail or back-plate layouts. Its V-0 flammability rating and CSA and UL 486A/486B approvals simplify compliance paperwork. The plastisol cover eliminates the need for separate heat-shrink or tape on the connection.

Highlights

  • Two-port design simplifies dual-conductor splicing
  • Aluminum body accepts both copper and aluminum wire
  • Hex-head 5/32 in drive enables fast torque-controlled installation
  • Plastisol insulation rated UL 94 V-0 resists flame spread
  • UL 486A/B and CSA listed for 600 V service

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

What wire sizes can I use with the two ports on this connector?

The connector accepts stranded copper wire from 14 AWG up to 2 AWG in each of its two ports.

Will the plastisol insulation hold up next to older 600 V equipment?

Yes, the connector is rated for 600 V and the plastisol insulation carries a UL 94 V-0 flammability rating.

How can I confirm the connection is secure after tightening the hex screws?

Tighten each screw with a 5/32 in hex driver until the conductor is firmly clamped; the UL 486A and 486B listing confirms the design meets pull-out and temperature requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.