We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium compression terminal, two-hole lug, green colour code, straight tongue, 1.62 in wide

Burndy

Burndy AL Compression Terminal 2 Hole 400 kcmil 1/2 in Stud 35 kV

SKU CH-BVR6-065T5

Dual-hole aluminum compression lug for 400 kcmil conductors, rated to 35 kV and 194 °F with CSA and UL certification

  • TypeCommercial
  • Handles 35 kV for high-voltage applications
  • Certified to CSA and UL 486A-486B standards
  • Crimps 400 kcmil aluminum or copper conductors
  • Operates up to 194 °F in demanding environments
  • Two-hole design with 1.75 in center spacing

Commercial AL Compression Terminal

This Burndy AL compression terminal is a commercial-grade lug built for aluminum and copper conductors. It accepts a single stranded copper wire size of 400 kcmil and fits a 1/2 in stud with a 1.75 in hole center-to-center spacing. The straight tongue measures 1.62 in wide and carries a green color code with die code 472.

Upgrade from smaller lugs or mechanical connectors

The jump is worth it when a project demands a crimp termination rated to 35 kV and a maximum operating temperature of 194 Degrees F. It meets CSA Certified, UL 486A-486B and UL Listed standards, replacing hardware that lacks those certifications or cannot handle the same voltage and temperature envelope.

Capacity and headroom for 400 kcmil aluminum

The barrel is sized for exactly 400 kcmil stranded copper, so it comfortably handles that gauge without over- or under-crimping. It runs out when the conductor exceeds 400 kcmil, requires an angled tongue, needs an inspection hole, or calls for a different stud size or hole spacing.

Highlights

  • Handles 35 kV for high-voltage applications
  • Certified to CSA and UL 486A-486B standards
  • Crimps 400 kcmil aluminum or copper conductors
  • Operates up to 194 °F in demanding environments
  • Two-hole design with 1.75 in center spacing

Specifications

BrandBurndy
TypeCommercial

Questions about this item

What is the tongue width and stud-hole spacing for the two-hole lug?

The tongue is 1.62 in wide and the hole centres are 1.75 in apart, matching a 1/2 in stud pattern.

Which crimp die code is required for the 400 kcmil barrel?

Use die code 472 with a standard-barrel compression tool to terminate the 400 kcmil conductor.

What is the maximum operating temperature the terminal is rated for?

The lug is rated to 194 Degrees F continuous service temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.