We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Burndy

Burndy AL Compression Terminal 2 Hole 4/0 AWG 5.700 in

SKU CH-6RJ6-J15JN

Aluminium compression terminal with two 1/2 in stud holes on 1.75 in centres, CSA certified and UL listed for 35 kV

  • Length5.700
  • TypeCommercial
  • Rated to 35 kV for high-voltage applications
  • Withstands 194 °F maximum operating temperature
  • Crimp termination creates a secure mechanical bond
  • Two-hole tongue with 1.75 in centre spacing
  • CSA certified and UL 486A-486B listed

AL Compression Terminal 4/0 AWG

This Burndy compression lug is designed for terminating 4/0 AWG stranded aluminum or copper conductors in commercial electrical installations. The two-hole tongue accepts 1/2 inch studs on a 1.75 inch centre-to-centre spacing for secure busbar or equipment connections.

194 °F rating 35 kV insulation

The aluminum body with white colour code operates continuously up to 194 degrees Fahrenheit and is rated for 35 kV maximum voltage. UL 486A-486B listing and CSA certification confirm compliance with North American safety standards for wire connectors.

Crimp termination die code 298

Installation requires a compatible crimp tool using die code 298 to form a permanent, low-resistance joint. The barrel includes no inspection hole, and the straight tongue measures 1.17 inches wide by 5.700 inches overall length.

Highlights

  • Rated to 35 kV for high-voltage applications
  • Withstands 194 °F maximum operating temperature
  • Crimp termination creates a secure mechanical bond
  • Two-hole tongue with 1.75 in centre spacing
  • CSA certified and UL 486A-486B listed

Specifications

BrandBurndy
Length5.700
TypeCommercial

Questions about this item

How is the 4/0 AWG compression terminal installed, and what step is often done incorrectly?

Strip the conductor to the barrel length, insert fully into the aluminium barrel, then crimp with a die coded 298; the common error is using the wrong die or not seating the wire to the inspection window.

What maintenance or replacement will the terminal need over time?

The aluminium body and crimp joint are maintenance-free; replacement is only required if the lug shows corrosion, physical damage, or the crimp connection loosens after repeated thermal cycling.

What limit appears first when the terminal runs continuously at high current?

The maximum operating temperature of 194 °F is the first constraint; sustained loading must keep the conductor and lug below this value to avoid degradation of the crimp and insulation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.