We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Burndy AL compression adapter, 2 AWG, tan finish, 1.85 in long

Burndy

Burndy AL Compression Adapter 2 AWG 1.85 in

SKU CH-HAN5-9W8V2

Compression adapter joins 2 AWG aluminum or copper conductors with a 0.234 in pin equivalent to 4 AWG, rated to 35 kV and 1.85 in long

  • Length1.85
  • TypeAL/CU Conductors
  • AL/CU dual-metal compatibility simplifies mixed wiring
  • Single-crimp 296 die code speeds installation
  • 35 kV rating supports high-voltage circuits
  • Tin-plated aluminium contact resists corrosion
  • 85 in overall length fits tight panels

Burndy AL Compression Adapter 2 AWG

This Burndy compression adapter is a straight pin terminal designed for 2 AWG stranded copper or aluminium conductors. The 1.85 in barrel accepts a single crimp using die code 296 and is rated for up to 35 kV. Tin-plated aluminium contact material and rubber insulation provide reliable electrical performance.

Suited for professionals terminating 2 AWG

Installers needing a different wire gauge, a right-angle orientation, or a non-insulated barrel should select another component. The fixed 2 AWG range and straight pin limit flexibility for multi-size or angled installations.

Critical spec: single 2 AWG stranded conductor

The adapter only accepts 2 AWG stranded copper or aluminium and requires exactly one crimp with die 296. Verify the conductor size and crimp tool before ordering to ensure a proper connection.

Highlights

  • AL/CU dual-metal compatibility simplifies mixed wiring
  • Single-crimp 296 die code speeds installation
  • 35 kV rating supports high-voltage circuits
  • Tin-plated aluminium contact resists corrosion
  • 85 in overall length fits tight panels

Specifications

BrandBurndy
Length1.85
TypeAL/CU Conductors

Questions about this item

Does the 0.234 in pin diameter on this Burndy adapter wear out and need replacement?

The tin-finished aluminum pin is a permanent crimp component; it does not wear out under normal electrical service and requires no scheduled replacement.

What limit appears first when this 35 kV adapter runs continuously at full load?

The single-crimp aluminum barrel and rubber insulation set the thermal and mechanical ceiling before the 35 kV voltage rating becomes a factor.

How much heat does the 0.6 in barrel generate during all-day operation?

The aluminum barrel with tin finish dissipates heat through its 1 in length; temperature rise stays within the rubber insulation rating for continuous duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.