We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, two holes, 1.02 inch tongue, purple color code

Burndy

Burndy 4/0 AWG Copper Compression Lug, 2 Hole, 1.02 in Tongue

SKU CH-WABE-7PFGH

Copper compression lug for 4/0 AWG wire with two 1/2 in stud holes on 1.75 in centres

  • Length5.200
  • TypeCommercial
  • CSA and UL certified for code-compliant installations
  • 35 kV rating handles high-voltage applications
  • 75 in hole spacing matches standard mounting patterns
  • 194 °F max temperature withstands demanding environments
  • 02 in tongue width fits 1/2 in studs securely

Burndy 4/0 AWG Copper Compression Lug

This Burndy 4/0 AWG copper compression lug is designed for terminating large-gauge stranded copper conductors in commercial electrical installations. It accepts a single wire size range from 4/0 AWG minimum to 4/0 AWG maximum and features a two-hole tongue with 1.75 in centre-to-centre spacing. The barrel uses die code 15 and carries a purple colour code for quick identification during crimping. It is UL 486A-486B listed and CSA certified for use up to 35 kV.

Suitable for high-current copper terminations

Electricians and panel builders who need a straight, two-hole copper lug rated for 35 kV and 194 °F maximum operating temperature will find this part fits standard 4/0 AWG stranded copper cable. The 1.02 in tongue width and 5.200 in overall length suit typical bus-bar and equipment-pad bolt patterns. Buyers who require an inspection window, an angled tongue, a different stud size or a multi-conductor barrel should look at alternative lug designs that provide those specific features.

Two-hole tongue with 1.75 in centre spacing

The defining specification is the two-hole tongue with 1.75 in hole centre-to-centre distance combined with a 1.02 in tongue width, which fixes the bolt pattern this lug can match. If the mounting holes on your bus bar or terminal block do not align to this exact spacing, the lug cannot be installed without modification. Verifying the 1.75 in centre measurement against your hardware is the single check that determines whether this is the correct part.

Highlights

  • CSA and UL certified for code-compliant installations
  • 35 kV rating handles high-voltage applications
  • 75 in hole spacing matches standard mounting patterns
  • 194 °F max temperature withstands demanding environments
  • 02 in tongue width fits 1/2 in studs securely

Specifications

BrandBurndy
Length5.200
TypeCommercial

Questions about this item

How can I verify the crimp is correct after installing the lug on 4/0 AWG copper wire?

Check that the die code 15 marking aligns with the crimp tool indentation and that the purple color code on the barrel matches the wire gauge.

What components are included with the Burndy compression lug and what must be sourced separately?

The lug itself is supplied; you must provide 4/0 AWG stranded copper wire and a compatible crimp tool for die code 15.

Which version of this lug should I choose for a 1/2 in stud with 1.75 in hole spacing?

This model has a 1.02 in tongue width, straight tongue angle, and two holes spaced 1.75 in center-to-center for 1/2 in studs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.