BUCIER
BUCIER VGA Male-to-Female Extension Cable 6.6FT 15 Pin 1080p
A 6.6 ft 15-pin VGA male-to-female extension cable supporting 1080p and lower resolutions with ferrite cores for stable transmission
- TypeVGA
- ColorBlack
- Length6.6FT
- Connector DetailVGA
- Terminal GenderMale-to-Female
- Conductorferrite
- Extends existing VGA cables by 6.6 feet for flexible placement
- 15-pin HD15 connectors support 1920x1200 and 1080p full HD resolution
- Dual ferrite cores and foil-braid shielding suppress EMI and RFI interference
- Compatible with monitors, projectors and KVM switches using standard 15-pin VGA ports
- Video-only cable with non-removable thumbscrews on the female connector
Extension cable for 15-pin VGA devices
This 6.6FT BUCIER extension cable adds reach to an existing HD15 VGA cord with a male-to-female layout. It supports video resolutions up to 1920x1200 and 1080p full HD, covering 800x600, 1024x768 and 1600x1200 modes. The cable suits laptops, PCs, projectors and displays that use a 15-pin VGA port. It does not support 9-pin VGA equipment.
Screw-in connectors and ferrite cores
Each end uses a standard HD15 screw-on shell; the female screws are non-removable so the link stays secure behind a desk or in a ceiling mount. Foil-and-braid shielding plus dual integrated ferrite cores suppress EMI, RFI and crosstalk during installation. The only common issue is attempting to plug the cable into a 9-pin legacy port, which the 15-pin design prevents.
Stable signal over the full 6.6FT
Shielded conductors and the two ferrite cores keep the video stream clean at 1920x1200 and 1080p across the entire length. No signal degradation appears during extended projection sessions in classrooms or conference rooms. The cable carries video only, so a separate audio path is required for sound.
Highlights
- Extends existing VGA cables by 6.6 feet for flexible placement
- 15-pin HD15 connectors support 1920x1200 and 1080p full HD resolution
- Dual ferrite cores and foil-braid shielding suppress EMI and RFI interference
- Compatible with monitors, projectors and KVM switches using standard 15-pin VGA ports
- Video-only cable with non-removable thumbscrews on the female connector
Specifications
| Model | EIQR005 |
|---|---|
| Type | VGA |
| Color | Black |
| Length | 6.6FT |
| Connector Detail | VGA |
| Terminal Gender | Male-to-Female |
| Conductor | ferrite |
| Features | Fast Transfer, Stable Transmission, Long Life |
Questions about this item
How can I verify the cable delivers a stable 1080p picture after connecting it?
Check that the display shows 1920x1080 or 1920x1200 without flicker; the dual ferrite cores and foil-and-braid shielding suppress EMI and RFI noise that causes artefacts
What comes in the box and what must I supply separately?
The box contains the 6.6FT 15-pin male-to-female VGA extension cable with integrated dual ferrite cores; you must provide the existing male-to-male VGA cable and the monitor or projector with a 15-pin port
Which length or pin version should I choose for a 15-pin VGA monitor?
This model is a 6.6FT 15-pin male-to-female extension cable; it supports 15-pin VGA (SVGA, XGA, UXGA, WUXGA) and does not work with 9-pin VGA devices
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



