BUCIER
BUCIER USB 3.1 Type-E Header to USB-C Extension Cable 40cm
Adds a rear-panel USB-C 3.1 port by connecting to the motherboard's Type-E header
- Connector TypeLighting to USB C
- Adds a rear USB-C port using the motherboard Type-E header
- 40 cm length fits standard case layouts
- Supports USB 3.1 speeds through the internal header
- PCI-slot bracket mounts securely at the back panel
Add USB-C to the Rear Panel
This 40 cm cable connects a motherboard USB 3.1 Type-E front-panel header to a PCI-slot bracket, giving the case back a USB-C port. It is intended for builders who want a rear-facing Type-C connection without replacing the board. The link uses the existing header so no extra controller is required. Installation only needs an open expansion slot and the matching header.
Check Header and Slot Availability
Before ordering, confirm the motherboard has a free USB 3.1 Type-E header and that the case offers an unused full-height bracket opening. The cable length is fixed at 40 cm, so verify the routing path reaches from header to slot. Systems lacking either the specific header or a spare bracket cannot use this adapter.
Highlights
- Adds a rear USB-C port using the motherboard Type-E header
- 40 cm length fits standard case layouts
- Supports USB 3.1 speeds through the internal header
- PCI-slot bracket mounts securely at the back panel
Specifications
| Connector Type | Lighting to USB C |
|---|
Questions about this item
What connectors are on each end of the 40 cm cable?
One end has a USB 3.1 Type-E header plug for the motherboard front-panel connector; the other end provides a USB-C port that mounts in a rear PCI slot bracket.
Does the 40 cm length reach from a bottom-row motherboard header to a full-height rear bracket?
The 40 cm cable is designed for that exact internal run; measure your own board-to-bracket distance to confirm it fits your chassis layout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
