BUCIER
BUCIER USB 3.1 Type-E 20-Pin Male to USB-C Female Cable 30cm 10Gbps 100W
Connects a motherboard USB 3.1 Type-E header to a front-panel USB-C port, delivering 10 Gbps data and 100 W power over a 30 cm flat cable
- ColorBlack
- Constructionsilver
- Adds a front-panel USB-C port via the motherboard Type-E header
- Transfers data at up to 10 Gbps with USB 3.2 Gen 2 support
- Delivers up to 100 W power to connected devices
- Ultra-thin flat cable bends 180 degrees for tidy routing
- Plug-and-play installation with 20 mm panel-mount screws
Front-panel USB-C upgrade
This 30 cm cable converts a motherboard USB 3.1 Type-E header into a front-panel USB-C female port. It suits builders adding modern device connectivity to cases lacking a native USB-C cutout. The reversible Type-C connector simplifies daily plug-in of phones, drives and hubs.
Replaces legacy front USB-A
The adapter upgrades an internal Type-E header so older front-panel USB 3.0 ports can be replaced with a single USB-C port. The jump is worth it when the board exposes a Type-E header and the case offers a 20 mm screw spacing for panel mounting. Boards without a Type-E header cannot use this cable.
Sustained 10 Gbps and 100 W
Silver-plated 16-pin wiring with four high-speed signal lines and double shielding keeps signal integrity stable during long transfers. The ultra-thin TPE flat cable tolerates repeated 180-degree bends without damage, maintaining 10 Gbps throughput and 100 W power delivery under continuous load.
Highlights
- Adds a front-panel USB-C port via the motherboard Type-E header
- Transfers data at up to 10 Gbps with USB 3.2 Gen 2 support
- Delivers up to 100 W power to connected devices
- Ultra-thin flat cable bends 180 degrees for tidy routing
- Plug-and-play installation with 20 mm panel-mount screws
Specifications
| Brand | SinLoon |
|---|---|
| Color | Black |
| Construction | silver |
Questions about this item
What motherboard header spacing does the 20-pin Type-E connector require?
The panel screw spacing is 20 mm, so the motherboard must provide a USB 3.1 Type-E header with that mounting pitch.
Which step is often missed when routing the 30 cm flat cable to the front panel?
Many builders forget to align the 20-pin plug with the keyed Type-E header before pressing it in; the connector only seats one way.
How many high-speed signal wires inside the cable may need checking if 10 Gbps drops to 5 Gbps?
The cable contains four high-speed signal wires alongside the 16-pin USB 3.1 bundle; a bent or crushed flat section can degrade them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


