We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB Type-C cable with dual screw locking connector to standard USB 3.0 A plug, 1.2m panel mount design

BUCIER

BUCIER USB 3.1 Type-C Dual Screw Locking to USB 3.0 Cable 1.2m Panel Mount

SKU CH-TEDY-0RTJN

Panel-mount USB 3.1 Type-C cable with dual screw locking for secure 10 Gbps data links to industrial cameras, 1.2 m length

  • TypeUSB
  • Connector TypeUSB Type C
  • ColorType-C Dual Screws to USB3.0-A
  • Cable Length30 ft
  • Length30 ft
  • Connector Number9
  • USB 3.1 Gen 2 delivers 10 Gbps throughput
  • Dual screw locking ensures secure panel-mount connection
  • Reversible USB-C plug inserts either way up
  • 2 m length suits typical industrial camera runs
  • Male-to-male copper conductors carry data reliably

Industrial USB 3.1 Type-C Cable

This 1.2 m cable connects a USB 3.1 Type-C port with dual screw locking to a standard USB 3.0 Type-A plug. It is built for industrial cameras and other equipment that requires a secure, vibration-resistant link. The reversible Type-C connector simplifies insertion in tight enclosures. Data transfers run at up to 10 gigabits per second over copper conductors.

Panel Cut-Out and Port Check

Verify that your device panel has the correct cut-out dimensions for the panel-mount locking screw before ordering. Confirm the host side provides a standard USB 3.0 Type-A receptacle and that the camera or peripheral uses a USB 3.1 Type-C interface with dual screw threads. The male-to-male gender means both ends plug directly into female ports without adapters. Cable routing must accommodate the 120 cm fixed length.

Sustained Transfer Behaviour

The screw-locking mechanism prevents disconnects caused by cable movement during long acquisition sessions. Copper construction maintains signal integrity over the full 1.2 m run at 10 Gb/s without the degradation seen in lighter gauge leads. Locking screws keep contact resistance stable under continuous vibration, so frame drops remain minimal during extended industrial imaging workloads.

Highlights

  • USB 3.1 Gen 2 delivers 10 Gbps throughput
  • Dual screw locking ensures secure panel-mount connection
  • Reversible USB-C plug inserts either way up
  • 2 m length suits typical industrial camera runs
  • Male-to-male copper conductors carry data reliably

Specifications

BrandBUCIER
TypeUSB
Connector TypeUSB Type C
ColorType-C Dual Screws to USB3.0-A
Cable Length30 ft
Length30 ft
Connector Number9
Connector DetailUSB Type C
Terminal GenderMale-to-Male
Speed10 gigabits_per_second
ConstructionCopper
FeaturesData Transfer

Questions about this item

What comes in the box and do I need to buy any extra mounting hardware?

The cable includes the dual screw locking Type-C connector and a standard USB 3.0 Type-A plug. The panel mount locking screw is built into the Type-C end, so no separate mounting hardware is required.

Should I choose the 1.2 m or the 30 ft length option?

Both figures describe the same cable; 1.2 m equals 120 cm, which is approximately 3.9 ft. There is no separate 30 ft version — the listing shows a single 1.2 m length.

What does the 10 Gbps headline speed mean when I plug this into my industrial camera?

The cable supports USB 3.1 Gen 2 at 10 Gbps, but the USB 3.0 Type-A end limits real-world throughput to 5 Gbps. You will see USB 3.0 speeds in practice.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.