We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 10 metre USB 3.0 extension cable with A male to A female connectors

BUCIER

BUCIER USB 3.0 Extension Cable 10m A Male to A Female 22/28AWG

SKU CH-5BNC-DGGXS

A 10 m USB 3.0 A Male to A Female extension cable rated at 4.8 Gbps with double foil shielding for stable data transfer

  • Connector TypeLighting Connector to USB A

Cable Length 32.8 ft.

  • Extends USB 3.0 devices up to 10 metres
  • Delivers 4.8 Gbps throughput with USB 3.0 host and device
  • Works with USB 2.0, 1.1 and 1.0 equipment
  • Double foil shield plus inner membrane reduces interference
  • Connects VR headsets, consoles, drives and peripherals across the room

10-metre USB 3.0 extension cable

This ten-metre cable extends a USB 3.0 Type-A connection between a host and a peripheral. It suits users who need to place flash drives, card readers, hard drives, keyboards, mice, printers, cameras or game consoles farther from the computer than a standard lead allows.

Sustained throughput at full length

The cable is rated for up to 4.8 Gbps when both ends connect to USB 3.0 equipment, and it falls back to USB 2.0, 1.1 or 1.0 speeds with older devices. Double foil shielding and a twisted-pair construction are intended to keep signal integrity stable over the full ten-metre run rather than only in short bursts.

Practical limits of the USB 3.0 interface

USB 3.0 specifies a maximum signalling rate of 5 Gbps, yet the standard does not guarantee that rate over ten metres without active circuitry. This passive 22/28 AWG extension reaches the distance by relying on shielding and cable geometry, so actual throughput may drop below the peak figure with demanding endpoints such as high-speed storage arrays or VR headsets.

Highlights

  • Extends USB 3.0 devices up to 10 metres
  • Delivers 4.8 Gbps throughput with USB 3.0 host and device
  • Works with USB 2.0, 1.1 and 1.0 equipment
  • Double foil shield plus inner membrane reduces interference
  • Connects VR headsets, consoles, drives and peripherals across the room

Specifications

Connector TypeLighting Connector to USB A

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 10 m length of this USB 3.0 cable cause any signal loss or heat build-up during all-day use?

The cable uses 22/28 AWG conductors with double foil shielding and a twisted-pair design to maintain stable transmission up to 4.8 Gbps over the full 10 m without active electronics, so heat and signal degradation are minimal.

What host port and device connector are required for this A Male to A Female extension to work?

You need a standard USB 3.0 Type-A port on the host and a USB 3.0 Type-A plug on the device; the cable simply extends that connection.

Will this 10 m extension still operate at USB 3.0 speeds when plugged into my older USB 2.0 hub?

The cable is backwards compatible with USB 2.0, 1.1 and 1.0, so it will work but at the host's lower 480 Mbps limit rather than the 4.8 Gbps maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.