BUCIER
BUCIER USB 3.0 19Pin Female to Female Extension Cable Blue 50cm
Extends a motherboard USB 3.0 19-pin header with a 50 cm blue female-to-female cable
- Connector TypeMicro USB to Mini USB
- Extends internal USB 3.0 header by 50cm
- Female-to-female 19Pin connectors link two headers directly
- Blue colour aids quick identification inside the case
- Approx. 50cm length suits compact motherboard layouts
- Connectors match standard 20Pin IDC with one pin removed
Internal USB 3.0 Header Extension
This 19-pin female-to-female cable extends an internal motherboard USB 3.0 header by roughly 50 centimetres. The blue IDC connectors match the standard 20-pin layout with one key pin removed. It is built for PC builders who need to route a front-panel USB 3.0 connection to a header that sits out of reach. The package contains a single cable ready for internal installation.
Builders with short front-panel leads
The cable suits anyone whose case front-panel USB 3.0 cable cannot reach the motherboard header. It does not help builders who need to convert a header to a different connector type such as Type-A or Type-C. It also cannot be used to extend an external peripheral cable because both ends are internal 19-pin female sockets.
19-pin female header compatibility
The decisive specification is that both connectors are 19-pin female sockets matching the motherboard USB 3.0 header pin-out. If the target header uses a different pin count or gender, this cable will not fit. Verify the header layout before purchase.
Highlights
- Extends internal USB 3.0 header by 50cm
- Female-to-female 19Pin connectors link two headers directly
- Blue colour aids quick identification inside the case
- Approx. 50cm length suits compact motherboard layouts
- Connectors match standard 20Pin IDC with one pin removed
Specifications
| Connector Type | Micro USB to Mini USB |
|---|
Questions about this item
What internal header must my motherboard provide to plug in this 19-pin female extension?
Your board needs a USB 3.0 20-pin header with one key pin removed, which is the standard 19-pin IDC layout this cable matches.
Will the 50 cm length reach a front-panel USB 3.0 port on an older case that uses the same 19-pin header?
Yes, the cable connects two 19-pin female headers, so it can bridge the motherboard header to an older front-panel module that uses the identical 19-pin connector.
How can I verify the link is running at USB 3.0 speed after I route the 50 cm blue cable?
Connect a USB 3.0 device to the front port, then check Device Manager or lsusb -t to confirm the link negotiates at 5 Gbps SuperSpeed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


