We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BUCIER

BUCIER USB 2.0 Type-B Printer Cable 2-Pack 25cm 90° Down

SKU CH-HYMF-WYSEJ

Two 25 cm USB 2.0 Type-B 90° down extension cables connect female to male ports for tight spaces

  • Typetype-b
  • Connector TypeUSB Type B
  • ColorBlack
  • Cable Length0.25
  • Length0.25
  • Connector Number4
  • Two-pack gives a spare cable for another device
  • 25 cm length reduces clutter on tight desks
  • 90° down angle routes wire neatly behind equipment
  • USB 2.0 supports 480 Mbps transfers for printers and drives
  • 28 AWG copper with braided shielding cuts signal loss

Two-pack 90-degree-down adapter

This two-pack supplies USB 2.0 Type-B female-to-male cables with a 90-degree downward bend. Each unit measures 25 cm and uses 28 AWG copper conductors with foil-and-braid shielding. The short length and right-angle plug relieve strain on tight rear-panel ports for printers, scanners or 3.5-inch mobile hard drives.

Replaces straight Type-B leads

A straight cable often forces a sharp bend behind equipment racks or desk-mounted peripherals. The 90-degree down orientation routes the wire parallel to the chassis, reducing connector stress and freeing vertical clearance. The upgrade is worth it whenever the port faces downward or sits flush against a wall or cabinet back.

Handles USB 2.0 speeds up to 480 Mbps

The assembly supports high-speed USB 2.0 at 480 Mbps and remains backward compatible with USB 1.1 at 12 Mbps and USB 1.0 at 1.5 Mbps. It provides ample headroom for document printing, scanner transfers and mechanical-drive file copies. It runs out of bandwidth for modern solid-state external drives or multi-camera video ingest that demand USB 3.0 or higher throughput.

Highlights

  • Two-pack gives a spare cable for another device
  • 25 cm length reduces clutter on tight desks
  • 90° down angle routes wire neatly behind equipment
  • USB 2.0 supports 480 Mbps transfers for printers and drives
  • 28 AWG copper with braided shielding cuts signal loss

Specifications

BrandSinLoon
Typetype-b
Connector TypeUSB Type B
ColorBlack
Cable Length0.25
Length0.25
Connector Number4
Connector DetailUSB Type B
Terminal GenderMale-to-Female
Speed0.012 gigabits_per_second
Apple CompatiblePrinter
Constructionpaper
FeaturesHigh Speed

Questions about this item

How much clearance does the 90° down USB-B male connector need behind the printer?

The 90° down angle bends the cable toward the device body, so you only need enough rear space for the 25 cm cable to run straight down without kinking.

What is the correct orientation when plugging the 90° down male end into the printer's USB-B port?

Align the male connector so the cable exits downward; forcing it upward can damage the port or the internal 28 AWG conductors.

When should I replace these 25 cm extension cables?

Replace a cable if the PVC sheath shows cracks, the braided shield is exposed, or data drops occur at 480 Mbps during printing or file transfer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.