We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 Type A male to male cable coiled 100Ft 30M

BUCIER

BUCIER USB 2.0 A Male to Male Cable 100Ft 30M 480Mbps

SKU CH-55WP-WD1ZG

A 30-metre USB 2.0 Type A male-to-male cable supporting 480 Mbps data transfer for hard drives, printers and other peripherals

  • Connector TypeLighting Connector to USB A
  • 100 ft reach for distant USB devices
  • 30 metre length suits large rooms or offices
  • 480 Mbps transfer speed moves files quickly
  • USB 2.0 spec keeps older gear working
  • Plug-and-play design needs no drivers

100-foot USB 2.0 A-to-A cable

This 100-foot USB 2.0 cable connects two Type-A ports for data transfer. It supports external hard-drive enclosures, printers, modems, cameras and other USB peripherals. The link runs at up to 480 Mbps and remains compatible with USB 1.0 and 1.1 devices. Plug-and-play operation requires no extra drivers.

Passive 30-metre copper run at 480 Mbps

The long passive copper run draws power from the host port and adds no active electronics. Signal quality depends on the host controller and the connected device meeting standard USB 2.0 voltage and timing specs. No external power adapter is included or required by the cable itself. Heat and noise are negligible because the assembly carries only low-voltage differential signals.

Sustained throughput limited by USB 2.0 bulk

Under continuous load the 480 Mbps ceiling is shared with protocol overhead and host scheduling, so real-world bulk transfer rates sit below the nominal figure. Very long cables can increase bit-error rates if the host or device operates near the edge of the electrical spec. The cable suits steady, moderate-bandwidth streams rather than high-speed burst workloads.

Highlights

  • 100 ft reach for distant USB devices
  • 30 metre length suits large rooms or offices
  • 480 Mbps transfer speed moves files quickly
  • USB 2.0 spec keeps older gear working
  • Plug-and-play design needs no drivers

Specifications

Connector TypeLighting Connector to USB A

Questions about this item

How do I install this 100Ft USB 2.0 A Male to Male cable and what step is often missed?

Plug each Type A Male connector into the host and peripheral ports; the step often missed is confirming both devices support USB 2.0 or 1.1 speeds so the 480Mbps link negotiates correctly.

What maintenance or replacement will this 30M cable need over time?

Inspect the connectors and jacket periodically for wear or kinks; replace the cable if the moulded strain reliefs crack or if intermittent disconnects appear during 480Mbps transfers.

What limit appears first when this 100Ft cable runs sustained 480Mbps transfers?

Signal attenuation over the 30M length is the first limit; the USB 2.0 spec expects shorter runs, so extended high‑speed use may drop to 1.1 speeds or require a powered hub.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.