BUCIER
BUCIER USB 2.0 A Male Right Angle to B Male Right Angle 90° Cable 50cm 10pcs
Pack of ten 50 cm USB 2.0 cables with right-angled Type-A and Type-B connectors for tight printer or scanner ports
- Connector TypeMicro USB to Mini USB
- Pack of ten cables keeps multiple devices connected
- Right-angle connectors fit tight spaces behind equipment
- USB 2.0 interface supports standard printer and scanner speeds
- 50 cm length reduces cable clutter on the desk
- Black finish matches common office hardware aesthetics
Pack of ten right-angle USB cables
This pack contains ten cables, each 50 cm long, with USB 2.0 Type A and Type B male connectors bent at 90 degrees. They are intended for connecting printers, scanners or similar peripherals to a computer. The black cables arrive new and are sold as a multi-pack for installations that need several identical leads.
Replaces straight or loose cables in tight spaces
The right-angle plugs let the cable run parallel to the device or port, reducing strain where rear clearance is limited. The upgrade is worthwhile when straight connectors foul adjacent ports, press against a wall or bend sharply enough to damage the jack over time.
Simple plug-in with no drivers required
Each end inserts like a standard USB cable; the only difference is the fixed 90-degree orientation. The most common issue is choosing the wrong angle direction for a specific port layout, so verify the socket orientation before routing the cable.
Highlights
- Pack of ten cables keeps multiple devices connected
- Right-angle connectors fit tight spaces behind equipment
- USB 2.0 interface supports standard printer and scanner speeds
- 50 cm length reduces cable clutter on the desk
- Black finish matches common office hardware aesthetics
Specifications
| Connector Type | Micro USB to Mini USB |
|---|
Questions about this item
How much space does the 90° right-angle USB 2.0 A Male connector need behind the port?
The 90° angled A Male plug extends parallel to the device, so only the connector height sits behind the port, ideal for tight rear I/O panels or wall-mounted PCs.
Which way do I line up the 90° B Male plug when connecting to a printer’s USB 2.0 B port?
Match the flat side of the B Male right-angle connector to the port’s flat edge; the cable then routes downward or sideways without forcing the 90° bend.
When should I replace one of the ten 50 cm cables in the bundle?
Swap a cable if the right-angle strain relief cracks, the gold-plated pins discolour, or data drops appear on USB 2.0 devices — each 50 cm link is rated for repeated mating cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


