We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black DisplayPort switch box, two ports, USB power cable included

BUCIER

BUCIER TD-DPSWICH1x2 DisplayPort 1.4 Switch 8K 30 4K 120 1080 240 32.4Gbps

SKU CH-83G7-WMEGQ

A bi-directional DisplayPort 1.4 switch toggles between two sources or displays at up to 8K 30 Hz, 4K 120 Hz or 1080p 240 Hz with 32.4 Gbps bandwidth

  • TypePlug In
  • Changer TypeDisplayPort to Displayport
  • ColorBlack
  • Ports2
  • Cable Length6
  • Input Connector2
  • Bi-directional switching connects two sources to one display or one source to two displays
  • 4 Gbps bandwidth enables 8K at 30 Hz, 4K at 120 Hz, 1080p at 240 Hz
  • Manual select button with LED indicators swaps signals in under one second
  • USB-powered operation ensures stable signal without flicker or black-screen issues
  • Compact 0.15 kg black enclosure fits neatly on any desk setup

BUCIER TD-DPSWICH1x2 DisplayPort 1.4 Switch

This bidirectional DisplayPort 1.4 switch connects two sources to one display or one source to two displays. It supports 8K at 30 Hz, 4K at 120 Hz and 1080p at 240 Hz with 32.4 Gbps bandwidth. The unit weighs 0.15 kg and requires external USB power to operate. Manual button switching changes the active signal path.

Replaces manual cable swapping for dual-PC

The switch eliminates the need to physically unplug and reconnect DisplayPort cables when moving between a workstation and a gaming rig or between two monitors. The upgrade is worthwhile when you frequently toggle between two video sources or need to share a single high-refresh display. It does not suit users who require both outputs active at the same time.

Plug-and-play with mandatory USB power

Connect the supplied USB cable for power, attach certified DP 1.4 cables no longer than three metres total, then press the select button to swap signals. Common issues include black screens or flicker when non-standard cables are used, when the USB power link is omitted, or when cable runs exceed the recommended length.

Highlights

  • Bi-directional switching connects two sources to one display or one source to two displays
  • 4 Gbps bandwidth enables 8K at 30 Hz, 4K at 120 Hz, 1080p at 240 Hz
  • Manual select button with LED indicators swaps signals in under one second
  • USB-powered operation ensures stable signal without flicker or black-screen issues
  • Compact 0.15 kg black enclosure fits neatly on any desk setup

Specifications

ModelTD-DPSWICH1x2
Part NumberD0201
TypePlug In
Changer TypeDisplayPort to Displayport
ColorBlack
Ports2
Cable Length6
Input Connector2
Maximum ResolutionsDisplayPort Switch
Weight0.15 kilograms

Questions about this item

What cable length and standard are required for the TD-DPSWICH1x2 to avoid flicker?

Use a standard DisplayPort 1.4 cable and keep the total run under 3 metres between the switch and each device.

How is the switch powered and which button changes the active source?

Connect the included USB cable for external power, then press the select button on the unit to toggle between the two inputs.

What resolution limits apply if one source is 8K and the other is 4K on the same display?

The display will run at the lower 4K capability, so the 8K source is downscaled to match the 4K source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.