BUCIER
BUCIER Slimline SATA 22 Pin Male to 13 Pin Female Cable Adapter 30cm 2PCS
Connects a slimline optical drive to a standard motherboard and power supply using a 30 cm shielded copper cable
- TypeSATA
- ColorRed and black
- Connector DetailOptical
- Terminal GenderMale-to-Female
- Speed3 gigabits_per_second
- ConductorCopper
- Connect slimline optical drives to standard SATA ports using the 22-pin male to 13-pin female adapter
- Route cables easily in tight cases with the 30 cm flexible extension reducing connector strain
- Maintain stable data transfer at 3 Gbps through 26 AWG shielded copper conductors
- Minimise signal interference with aluminium-foil and multi-layer shielding on each cable
- Install quickly with plug-and-play connectors featuring easy-grip treads for secure removal
Slimline SATA Adapter for Optical Drives
This BUCIER adapter converts a 22 pin slimline SATA male connector to a 13 pin standard SATA female connector. It lets you connect a slimline optical drive to a desktop motherboard and power supply. The 30cm cable length eases routing inside a chassis compared with a rigid dongle. Two adapters are included in the pack.
Shielded Copper Conductors with Low Heat
Each cable uses 26 AWG copper cores wrapped in aluminium foil and multilayer shielding to reduce interference. The copper conductor provides high conductivity and low resistance, keeping heat generation low during normal data transfer. Connectors feature easy-grip treads for secure mating and simple removal in tight spaces. The PVC jacket protects the conductors during installation.
Stable 3 Gb/s Transfer Under Sustained Use
Rated for 3 gigabits per second, the link maintains consistent throughput during extended read or write sessions with optical media. Shielded parallel pairs and the copper power leads preserve signal integrity without the voltage drop seen in shorter, unshielded jumpers. The 30cm length continues to relieve mechanical stress on the drive connector throughout long operating periods.
Highlights
- Connect slimline optical drives to standard SATA ports using the 22-pin male to 13-pin female adapter
- Route cables easily in tight cases with the 30 cm flexible extension reducing connector strain
- Maintain stable data transfer at 3 Gbps through 26 AWG shielded copper conductors
- Minimise signal interference with aluminium-foil and multi-layer shielding on each cable
- Install quickly with plug-and-play connectors featuring easy-grip treads for secure removal
Specifications
| Brand | XMSJSIY |
|---|---|
| Model | LE-45 |
| Type | SATA |
| Color | Red and black |
| Connector Detail | Optical |
| Terminal Gender | Male-to-Female |
| Speed | 3 gigabits_per_second |
| Conductor | Copper |
| Features | Data Transfer |
Questions about this item
How do I install the 22-pin male to 13-pin female adapter and what is the common mistake?
Plug the 22-pin end into the slimline optical drive and the 13-pin end into the motherboard SATA port and power connector; the step often missed is aligning the keyed L-shape on both data and power sections before pressing firmly.
What maintenance or replacement will the 30 cm cable need over time?
The PVC jacket and 26 AWG copper conductors are rated for static installation; reseat the connectors if intermittent errors appear, otherwise no scheduled replacement is required.
What limit appears first during sustained transfers on the 3 Gbps link?
The 3 Gbps SATA interface sets the maximum sustained throughput, so continuous reads or writes from a fast drive will saturate the link before the cable or shielding becomes a factor.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
