BUCIER
BUCIER SFF-8654 Slimline SAS 4.0 38 Pin to 4 SATA 7 Pin Cable 0.5m 12Gbps
Connects a Slimline SAS 4.0 38-pin host to four SATA drives at 12 Gbps over 0.5 m
- TypeFiber Optic
- ColorBlack
- Length1.6 feet
- Connector DetailSata
- Terminal GenderMale-to-Male
- Speed12 gigabits_per_second
- Connect four SATA drives with one 38-pin SlimSAS 4i cable
- 12 Gbps per channel for fast server storage links
- 5 m length keeps rack cabling tidy
- Straight SFF-8654 to four SATA 7-pin connectors
- Copper conductors deliver reliable 24 Gbps aggregate throughput
Slimline SAS 4.0 host-to-SATA fan-out
This cable links a controller with an SFF-8654 38-pin 4i connector to four drives that use standard SATA 7-pin ports. It is built for internal wiring in servers, workstations and storage arrays where a single high-speed lane must be split to multiple targets. The 0.5 m length keeps routing tidy inside dense chassis.
Server and storage builders needing four SATA links
Suits administrators who want to populate four SATA drives from one Slimline SAS 4.0 port without adding extra controllers. Not for setups that require SFF-8654 target connectors, external Mini-SAS HD cabling, or longer runs beyond the supplied half-metre.
12 Gbps per lane over four channels
Each of the four channels carries up to 12 Gbps, matching SAS 4.0 lane speed for current enterprise SSDs and HDDs. The copper conductors and straight-through pinout preserve signal integrity across the short 50 cm assembly.
Highlights
- Connect four SATA drives with one 38-pin SlimSAS 4i cable
- 12 Gbps per channel for fast server storage links
- 5 m length keeps rack cabling tidy
- Straight SFF-8654 to four SATA 7-pin connectors
- Copper conductors deliver reliable 24 Gbps aggregate throughput
Specifications
| Brand | XMSJSIY |
|---|---|
| Model | Slimline SAS |
| Type | Fiber Optic |
| Color | Black |
| Length | 1.6 feet |
| Connector Detail | Sata |
| Terminal Gender | Male-to-Male |
| Speed | 12 gigabits_per_second |
| Conductor | Copper |
Questions about this item
Will the SFF-8654 38-pin end plug into my older 12Gbps SAS controller?
Yes, the cable uses a Slim SAS SFF-8654 4i 38-pin host connector rated for 12Gbps, matching controllers with that interface.
How can I verify the 12Gbps link is active after connecting the four SATA drives?
Check the controller BIOS or OS utility for each port showing a 12Gbps negotiated speed and no errors on the four SATA 7-pin targets.
Does the 0.5m cable include the four SATA 7-pin connectors or must I buy them separately?
The assembly ships complete with one SFF-8654 38-pin plug and four SATA 7-pin plugs; no extra connectors are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



