We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 50cm SAS 29-pin to SATA 7-pin cable with 15-pin power connector

BUCIER

BUCIER SF-088-0.5M-XY SFF-8482 SAS 29 Pin to 7 Pin SATA Cable with 15 Pin Power 50cm

SKU CH-0TA1-TYE1S

Connects a SAS drive with SFF-8482 port to a SATA controller, includes 15-pin power, 50cm length

  • TypeSFF-8482 SAS 29 Pin to 7 Pin SATA
  • ColorWith SATA Power
  • Length1.6 feet
  • Connector DetailSas to Sata
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • Connects SAS drives to SATA controllers via SFF-8482 interface
  • Integrated 15-pin power connector eliminates separate power cable
  • 6 Gb/s transfer speed supports high-performance storage arrays
  • 50 cm length fits compact server and workstation chassis
  • Copper conductors ensure reliable signal integrity over full length

SFF-8482 SAS 29 Pin to 7 Pin SATA Cable

This BUCIER SF-088-0.5M-XY cable bridges a 29 pin SAS SFF-8482 drive to a 7 pin SATA controller port. A 15 pin SATA power connector supplies the drive directly. Copper conductors support 6 gigabits_per_second signal rates. The assembly measures 50cm end to end.

Suits RAID arrays and single drives with SFF-8482

Builders connecting SAS hard disks to hybrid SATA controllers use this link. The integrated 15 pin power tail removes the need for a separate power lead. Not for drives using standard SATA data connectors or controllers without SAS/SATA hybrid capability. Not for external eSATA enclosures or backplanes requiring straight-through SATA cabling.

SFF-8482 29 pin SAS connector decides compatibility

The 29 pin SAS plug mates only with drives and backplanes that expose the SFF-8482 interface. A standard 7 pin SATA receptacle will not accept this connector. Verify the target device lists SFF-8482 before ordering.

Highlights

  • Connects SAS drives to SATA controllers via SFF-8482 interface
  • Integrated 15-pin power connector eliminates separate power cable
  • 6 Gb/s transfer speed supports high-performance storage arrays
  • 50 cm length fits compact server and workstation chassis
  • Copper conductors ensure reliable signal integrity over full length

Specifications

BrandBUCIER
ModelSF-088-0.5M-XY
TypeSFF-8482 SAS 29 Pin to 7 Pin SATA
ColorWith SATA Power
Length1.6 feet
Connector DetailSas to Sata
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
ConductorCopper
FeaturesCompatible

Questions about this item

How do I connect the 29-pin SFF-8482 end to my SAS drive without bending the pins?

Align the keyed SFF-8482 connector with the drive port and press straight in; the 7-pin SATA data plug goes to the controller and the 15-pin power lead attaches to a standard SATA power cable from the PSU.

Will the 15-pin SATA power connector need replacement after repeated drive swaps?

The 15-pin power plug is rated for typical insertion cycles; if the latch tabs weaken or pins discolour, replace the whole 50 cm cable rather than repairing the connector.

At what point does the 6 Gb/s copper link become the bottleneck during sustained RAID rebuilds?

The 6 Gb/s SAS-to-SATA interface saturates before the drive media during long sequential rebuilds, capping sustained throughput at that signalling rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.