BUCIER
BUCIER 4-pin LP4 to Dual 15-pin SATA Power Y Splitter 8in 18AWG 2-pack
Converts a single LP4 connector into two latching SATA power ports using 18 AWG wire
- TypeCoaxial
- Colorblack red yellow
- Length8
- Connector DetailOptical
- Terminal GenderMale-to-Female
- Conductorlead
- Powers two SATA drives from one LP4 connector
- 18 AWG wire handles current better than 22 AWG
- Latching SATA plugs prevent accidental disconnection
- 8-inch length keeps internal cabling tidy
- Two cables included for upgrades or repairs
LP4-to-SATA power splitter for legacy PSUs
This 4-pin LP4 female to dual 15-pin SATA female Y-cable lets a power supply with Molex LP4 ports run two SATA drives. Each 8-inch splitter uses 18 AWG wire and includes a latching SATA connector to prevent accidental disconnection. The pack contains two identical cables for multiple drive bays.
Suits builders keeping an older PSU
Ideal for anyone adding 3.5-inch SATA hard disks or optical drives to a system that still relies on LP4 power outputs. Not for builders who need to power drives from a native SATA power connector or who require a longer reach than 8 inches.
Dual-drive Y-splitter with latching ends
The Y-shape powers two devices from one LP4 socket, while the latch on each 15-pin plug secures the connection inside tight cases. The 18 AWG conductors handle the current more robustly than thinner 22 AWG alternatives. Two cables in the pack give a spare for upgrades or repairs.
Highlights
- Powers two SATA drives from one LP4 connector
- 18 AWG wire handles current better than 22 AWG
- Latching SATA plugs prevent accidental disconnection
- 8-inch length keeps internal cabling tidy
- Two cables included for upgrades or repairs
Specifications
| Brand | GELRHONR |
|---|---|
| Type | Coaxial |
| Color | black red yellow |
| Length | 8 |
| Connector Detail | Optical |
| Terminal Gender | Male-to-Female |
| Conductor | lead |
| Features | Magnetic |
Questions about this item
What power-supply connector must I already have to plug in this 4-pin LP4 female end?
Your power supply needs a free 4-pin LP4 (Molex) male connector to mate with the splitter’s LP4 female plug.
Will the 18 AWG wires on this Y-cable safely deliver 5 V and 12 V to older 3.5-inch SATA hard drives and optical drives?
Yes, the 18 AWG conductors are rated for the 5 V and 12 V rails that 3.5-inch SATA HDDs, DVD-RW and CD-RW drives require.
How can I verify both SATA drives are receiving power after I connect the dual 15-pin latching connectors?
Check that each drive spins up and appears in BIOS or the OS disk utility; the latch on each 15-pin plug prevents accidental disconnection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



