BUCIER
BUCIER 3 Pack 6 Ft USB 2.0 A-Male to B-Male Cable
Three six-foot USB 2.0 A-to-B cables connect printers or scanners to a PC or Mac at up to 480 Mbps
- Connector TypeLighting Connector to USB A
- 3-pack gives spare cables for multiple devices
- USB 2.0 supports up to 480 Mbps transfer speed
- Type A to Type B fits printers and scanners
- 28/26 AWG wire handles data and power reliably
- Compatible with USB 1.0, 1.1 and 2.3 specifications
Three-cable pack for printers
This BUCIER pack contains three six-foot USB 2.0 cables with Type A male to Type B male connectors. They link a PC or Mac USB port to printers, scanners and similar peripherals. Each cable uses 28/26 AWG wire and supports the USB 1.0, 1.1 and 2.0 specifications for broad compatibility.
Replaces worn or short leads
Swap out a damaged, missing or too-short printer cable without buying single units at a premium. The jump is worth it when you need spare cables for several devices or want a reserve for future hardware changes. Plug-and-play operation means no driver installation on supported systems.
Handles standard USB 2.0 duties
Transfer rates reach 480 Mbps, sufficient for everyday printing, scanning and peripheral communication. The Type B end fits common printer and scanner ports, while the Type A end fits host ports on hubs, PCs or Macs. Bandwidth limits appear with high-speed external storage or video capture, which exceed USB 2.0 throughput.
Highlights
- 3-pack gives spare cables for multiple devices
- USB 2.0 supports up to 480 Mbps transfer speed
- Type A to Type B fits printers and scanners
- 28/26 AWG wire handles data and power reliably
- Compatible with USB 1.0, 1.1 and 2.3 specifications
Specifications
| Connector Type | Lighting Connector to USB A |
|---|
Questions about this item
Does the 6 ft USB 2.0 A-Male to B-Male cable fit the USB-B port on an HP DeskJet 3755 printer?
Yes, the Type B male connector matches the standard USB-B port found on the HP DeskJet 3755 and similar printers.
What is the correct way to plug in the A-Male and B-Male ends, and which mistake should I avoid?
Insert the Type A male end into the computer or hub and the Type B male end into the printer; do not force the connectors upside down.
Will the 28/26 AWG wire need replacement after heavy daily use?
The 28/26 AWG construction is rated for normal USB 2.0 traffic up to 480 Mbps; replace only if the cable shows physical wear or intermittent connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


