BUCIER
BUCIER 3-01-1789 2.4GHz 2.5dBi U.FL-4 RP SMA 15CM 90° 2pcs
Two 2.4 GHz 2.5 dBi antennas with U.FL-4 to RP-SMA connectors, 15 cm leads and 90° right-angle fold
- TypeWiFi antenna
- ColorBlack
- SpecificationsWiFi antenna
- FeaturesWiFi antenna
- 4 GHz coverage for ZigBee and Wi-Fi networks
- 5 dBi gain strengthens signal in the 2400-2500 MHz band
- 15 cm pigtail with 90° right-angle U.FL-4 connector fits tight spaces
- RP-SMA male plug connects directly to compatible routers and modules
- VSWR 1.5 and 50 W power rating ensure reliable transmission
Two antennas for 2.4 GHz networks
This pair of omnidirectional antennas operates in the 2400-2500 MHz band with 2.5 dBi gain. They connect via U.FL-4 to RP-SMA male plugs and are suited for ZigBee routers or similar 2.4 GHz wireless modules.
Right-angle folded leads and copper elements
Each antenna has a 90 degree folded lead approximately 15 cm long. The radiating element uses copper and the connector type is SMA. Vertical polarisation and direct-ground lightning protection are built in.
2.5 dBi gain at 2.4 GHz
The gain figure of 2.5 dBi and 50 ohm impedance determine whether this pair matches your link budget. Buyers needing higher gain or a different frequency band should look elsewhere.
Highlights
- 4 GHz coverage for ZigBee and Wi-Fi networks
- 5 dBi gain strengthens signal in the 2400-2500 MHz band
- 15 cm pigtail with 90° right-angle U.FL-4 connector fits tight spaces
- RP-SMA male plug connects directly to compatible routers and modules
- VSWR 1.5 and 50 W power rating ensure reliable transmission
Specifications
| Brand | HiLetgo |
|---|---|
| Model | 3-01-1789 |
| Part Number | 3-01-1789 |
| Type | WiFi antenna |
| Color | Black |
| Specifications | WiFi antenna |
| Features | WiFi antenna |
Questions about this item
What frequency range does the 2.4GHz antenna cover and what is its peak gain?
The antenna operates from 2400 to 2500 MHz with a gain of 2.5 dBi.
What connector types are on each end of the 15 cm lead?
One end has a U.FL-4 connector and the other has an RP SMA male connector with a 90 degree right angle fold.
How do you attach the antenna to a device with a U.FL-4 port?
Press the U.FL-4 plug straight onto the board socket until it clicks; the 90 degree fold then lets the RP SMA end sit flat against the chassis.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



