BUCIER
BUCIER 20 Pin Header Female to USB-C Cable 50cm
Adds a USB 3.1 Type-C port to a 19-pin motherboard header with a 50 cm cable and PCIe bracket
- Connector TypeLighting Connector to USB A
- Connect motherboard header to USB-C port via 19-pin adapter
- Achieve 5 Gb/s transfer speed with USB 3.1 Gen 1 support
- Maintain compatibility with USB 3.0 and USB 2.0 devices
- Mount securely using included PCIe profile bracket
- Extend connectivity with 50 cm cable length
Front-panel USB-C from a 19-pin header
This 50 cm cable converts a motherboard 19-pin USB 3.1 header into a USB-C female port on a PCIe-profile bracket. It is intended for builders adding a front-panel Type-C connection to a desktop case.
Sustained 5 Gb/s throughput
The link runs at 5 Gb/s under USB 3.1 Gen 1 signalling and remains compatible with USB 3.0 and USB 2.0 devices. No 10 Gb/s mode is supported, so extended transfers settle at the 5 Gb/s ceiling.
Bracket-mounted female port
A supplied profile bracket secures the USB-C connector to a rear expansion slot, giving a fixed, strain-relieved port for daily plugging. The 20-pin header end plugs directly onto the board without adapters.
Highlights
- Connect motherboard header to USB-C port via 19-pin adapter
- Achieve 5 Gb/s transfer speed with USB 3.1 Gen 1 support
- Maintain compatibility with USB 3.0 and USB 2.0 devices
- Mount securely using included PCIe profile bracket
- Extend connectivity with 50 cm cable length
Specifications
| Connector Type | Lighting Connector to USB A |
|---|
Questions about this item
How much power does the 19-pin header cable draw when the USB-C port runs all day?
The adapter is passive and draws no extra power beyond what the motherboard 19-pin header supplies to the connected USB-C device.
What must the motherboard already provide for this 19-pin header to USB-C cable to work?
A free 19-pin USB 3.1 header on the motherboard and an open PCIe bracket slot for the included profile bracket.
Will the 5 Gbps Type-C port work with older USB 2.0 or 3.0 devices I keep using?
Yes, the port is fully backward compatible with USB 3.0 and USB 2.0 peripherals at their native speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



