We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BUCIER

BUCIER 2-Pack USB 3.1 Type-E 20-Pin to USB-C Female 30cm 10Gbps Full-Height Bracket

SKU CH-9GYH-9F28A

Converts a motherboard Type-E header into two front-panel USB-C ports with 10Gbps data and 100W power

  • ColorBlack
  • Apple CompatibleASUS ROG MAXIMUS IX FORMULA
  • Constructioncopper
  • Adds two front-panel USB-C ports from a single Type-E header
  • 10 Gbps data rate with USB 3.2 Gen 2 performance
  • Delivers up to 100 W power for charging devices
  • 30 cm ultra-thin flat cable bends 180° for easy routing
  • Full-height PCIe bracket fits standard ATX cases only

Two-port bracket for Type-E motherboards

This BUCIER kit converts a single USB 3.1 Type-E 20-pin header into two external USB-C ports mounted on a full-height PCIe bracket. It is aimed at builders whose chassis front panel lacks USB-C but whose motherboard exposes the internal Type-E connector. Each pack supplies two cables and a dual-port bracket for standard ATX cases.

Installation notes and common issues

The ultra-thin flat cable bends 180 degrees and routes easily behind the motherboard tray. Mount the bracket using the 20 mm screw spacing; the full-height bracket will not fit microcomputer cases. The motherboard must provide a USB 3.1 Type-E header — boards with only the older 19-pin USB 3.0 header cannot use this adapter. No drivers are required; the connection is plug and play.

Sustained load behaviour

Rated for 10 Gbps under the USB 3.2 Gen 2 specification and backward compatible with 5 Gbps Gen 1 devices, the copper conductors maintain signal integrity over the 30 cm length during extended transfers. The assembly supports up to 100 W power delivery, so attached devices can charge at full speed while data moves continuously without thermal throttling of the cable itself.

Highlights

  • Adds two front-panel USB-C ports from a single Type-E header
  • 10 Gbps data rate with USB 3.2 Gen 2 performance
  • Delivers up to 100 W power for charging devices
  • 30 cm ultra-thin flat cable bends 180° for easy routing
  • Full-height PCIe bracket fits standard ATX cases only

Specifications

BrandSinLoon
ColorBlack
Apple CompatibleASUS ROG MAXIMUS IX FORMULA
Constructioncopper

Questions about this item

How can I confirm the 10Gbps link is active after installing the bracket?

Connect a USB-C device and check the OS device manager or system profiler; it should list the port as USB 3.2 Gen 2 running at 10Gbps.

What does the 2-pack include and what must I supply?

Two 30cm Type-E 20-pin to USB-C female cables with a full-height PCIe bracket and panel-mount screws; you need a motherboard with a USB 3.1 Type-E header and a standard ATX case.

Which version should I choose if my board has a USB 3.0 header instead of Type-E?

This adapter requires a USB 3.1 Type-E header; it will not work with a USB 3.0 header, so choose a different product for that connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.