We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black right-angle 6-pin PCIe power adapters, plastic, 3 by 1.5 by 1.7 cm

BUCIER

BUCIER 2-Pack 180° Down-Angled ATX 6-Pin Female to Male PCIe Power Adapter

SKU CH-P0C6-R5GYK

Two 180-degree down-angled ATX 6-pin female-to-male PCIe power adapters route cables horizontally in low-profile cases

  • ColorDown
  • Connector Number2
  • Fits tight chassis by routing 6-pin power from vertical to horizontal
  • 180-degree down-angled connectors prevent cable strain in low-profile builds
  • Two adapters included for dual-GPU or spare configurations
  • Standard PCIe 6-pin interface works with Radeon and other graphics cards
  • Compact 3 cm × 1.5 cm × 1.7 cm body leaves room for airflow

Down-Angled 6-Pin Power Adapter

This two-pack adapter converts a vertical ATX 6-pin PCIe cable into a horizontal connection using a 180-degree down-angled design. It targets builders fitting graphics cards into chassis with restricted vertical clearance above the GPU power socket. Each unit measures 3 cm by 1.5 cm by 1.7 cm and is moulded in black plastic.

Build Integration and Clearance

The female jack accepts the PSU cable while the male plug inserts into the graphics card, rerouting the wire 180 degrees downward. This reorientation frees vertical space inside low-profile cases where a straight connector would press against the side panel or CPU cooler. The adapter is keyed for GPU power only and must not be used on motherboard or CPU headers.

Capacity Limits and Compatibility

The connector pair carries standard PCIe 6-pin current ratings for compatible graphics cards from brands such as ASUS, Gigabyte, EVGA, Radeon, Sapphire and NVIDIA Tesla. It cannot supply power to motherboard or CPU sockets and offers no additional pins for 8-pin GPU requirements. Installers should unplug the PSU and wait 20 seconds before fitting to avoid shorting pins.

Highlights

  • Fits tight chassis by routing 6-pin power from vertical to horizontal
  • 180-degree down-angled connectors prevent cable strain in low-profile builds
  • Two adapters included for dual-GPU or spare configurations
  • Standard PCIe 6-pin interface works with Radeon and other graphics cards
  • Compact 3 cm × 1.5 cm × 1.7 cm body leaves room for airflow

Specifications

BrandAAOTOKK
ColorDown
Connector Number2

Questions about this item

How tight is the 180 ° down-angled bend when routing the 6-pin cable in a cramped case?

The adapter measures 3 cm long, 1.5 cm wide and 1.7 cm high, so the U-shaped turn fits inside low-profile chassis without forcing the cable.

Does the plastic housing stay cool when the GPU draws full power all day?

The moulded plastic body carries only the 6-pin PCIe current; it has no active cooling and runs at the same temperature as the cable itself.

What power supply connector must already be free to use this adapter?

A standard ATX 6-pin PCIe plug from the PSU is required; the adapter converts that straight plug into a down-angled 6-pin socket for the graphics card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.