BUCIER
BUCIER 12G Internal Mini SAS HD SFF-8643 Cable 0.8m 2 Pack
Two-pack of 0.8-metre internal Mini SAS HD SFF-8643 cables with sideband, 100-ohm impedance and 12 Gbps data rate
- 12 Gbps throughput for high-speed SAS links
- 100-ohm impedance ensures signal integrity
- Sideband support enables out-of-band management
- 8 m length fits compact server chassis
- Two cables included for dual-port configurations
Internal Mini SAS HD cable pair
This BUCIER two-pack provides 0.8-metre Mini SAS HD SFF-8643 cables for connecting internal storage controllers to backplanes or drive cages. They are intended for server and workstation builders who need 12Gbps SAS links inside a chassis.
12Gbps rated link speed
The single specification that determines compatibility is the 12Gbps data-rate rating, which matches 12G SAS controllers and 12G-capable backplanes. Using the cable on a 6G-only link will work but wastes the headroom the cable is built for.
100-Ohm impedance under sustained load
Each cable is manufactured to a 100-Ohm impedance target and includes sideband conductors, so signal integrity remains stable during continuous high-throughput transfers rather than only in short bursts.
Highlights
- 12 Gbps throughput for high-speed SAS links
- 100-ohm impedance ensures signal integrity
- Sideband support enables out-of-band management
- 8 m length fits compact server chassis
- Two cables included for dual-port configurations
Specifications
No published specifications for this item yet.
Other versions of this model
2 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What does the 12 Gbps rating mean once the cable is installed in a server?
Each lane carries up to 12 Gbps, so a four-lane SFF-8643 link delivers 12 Gbps per lane when both ends run 12 Gb SAS hardware.
How does the SFF-8643 interface limit real-world throughput?
The 100-ohm SFF-8643 connector caps each lane at 12 Gbps; actual speed depends on the controller and drives at either end.
What clearance does the 0.8 m length need inside a chassis?
The 0.8 m (2.6 ft) cable needs enough routing space for a 2.6 ft run between backplanes or controller cards.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
More in SATA / eSATA Cables
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- Cable Connectors
- Multi-Color
Vszerda SF-014-HX OCuLink SFF-8611 4i to SFF-8611 Active Cable 50cm
- oculink cable
- Black
STARTECH PYO2SATA 6in SATA Power Y Splitter Cable 19g
- Cable Connectors
- Multi-Color







